FMIC On ebay for £215...
27 July 2005, 09:31 AM
#31
Scooby Regular
Thread Starter
Originally Posted by Jolly Green Monster
I run steel pipes with no issue.. so even if they are steel.. think it is worrying over nothing.
Simon
Simon
27 July 2005, 02:31 PM
#33
Scooby Newbie
Join Date: Jul 2005
Location: Darlington
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
i have fit one of these intercoolers that cost £250 they are ok but you get what you pay for the pipe work is mild steel and has shoddy welding and you don,t get all the pipe work you need the joining clips are just jubilee clips i have found the best one,s are off harvey smith he supplies every thing you need and is always on the end of the phone if you have any problems i believe he can even gat them fitted for a good price for you
27 July 2005, 06:06 PM
#36
Scooby Regular
Thread Starter
Originally Posted by Mr Footlong
Lol, not a full stop in sight on that post 
.
.
27 July 2005, 11:20 PM
#37
Scooby Regular
iTrader: (7)
Join Date: Jun 2001
Location: Stalking Kate Beckinsale
Posts: 4,265
Likes: 0
Received 0 Likes
on
0 Posts
I had no idea my post was worthy of a quote . Any info you can give us will be very useful to put it mildly. Install pics would fantastic too tbh 
.
Cheers,
Nick
. Any info you can give us will be very useful to put it mildly. Install pics would fantastic too tbh .Cheers,
Nick
28 July 2005, 02:12 PM
#39
Scooby Regular
Thread Starter
Originally Posted by austen_wrx
mmmm, maybe interested in one of these. Looking at upgrading to an STI7/8 IC, but at this price its very inetersting. Let us know how it goes!
28 July 2005, 08:46 PM
#40
Scooby Regular
iTrader: (7)
Join Date: Oct 2003
Location: Stealth mode on
Posts: 5,277
Likes: 0
Received 0 Likes
on
0 Posts
I'll be watching this post with interest.
I've been watching these on ebay aswell, When some one gets theres, I'm interested to know how the dump volve connnects, I have a MY99 uk turbo and the DV bolts directly onto the standard intercooler.
I've been watching these on ebay aswell, When some one gets theres, I'm interested to know how the dump volve connnects, I have a MY99 uk turbo and the DV bolts directly onto the standard intercooler.
28 July 2005, 10:35 PM
#41
Scooby Regular
Join Date: Dec 2002
Location: devon
Posts: 2,944
Likes: 0
Received 0 Likes
on
0 Posts
fitted a flea-bay fmic to mine a month ago,all looks fine,slightly dearer than 215 but still a bargain when it eventually came
i also have a my99-00 , , re the bov . . get 1 for a my98 and a samco straight reducer pipe 35-25mm . . fits a piece of pi55 then
i must do the magnet check though..lol
heres some pics of mine,
note the inner wing HAD to be cut and the pipe runs under the K+N
also a good idea to lag the pipe that runs over the turbo
daz
i also have a my99-00 , , re the bov . . get 1 for a my98 and a samco straight reducer pipe 35-25mm . . fits a piece of pi55 then
i must do the magnet check though..lol
heres some pics of mine,
note the inner wing HAD to be cut and the pipe runs under the K+N
also a good idea to lag the pipe that runs over the turbo
daz
29 July 2005, 09:52 AM
#45
Scooby Regular
iTrader: (7)
Join Date: Oct 2003
Location: Stealth mode on
Posts: 5,277
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by scoobyDAZZA
fitted a flea-bay fmic to mine a month ago,all looks fine,slightly dearer than 215 but still a bargain when it eventually came
i also have a my99-00 , , re the bov . . get 1 for a my98 and a samco straight reducer pipe 35-25mm . . fits a piece of pi55 then
i must do the magnet check though..lol
heres some pics of mine,
note the inner wing HAD to be cut and the pipe runs under the K+N
also a good idea to lag the pipe that runs over the turbo
i also have a my99-00 , , re the bov . . get 1 for a my98 and a samco straight reducer pipe 35-25mm . . fits a piece of pi55 then
i must do the magnet check though..lol
heres some pics of mine,
note the inner wing HAD to be cut and the pipe runs under the K+N
also a good idea to lag the pipe that runs over the turbo
I've never atempted anything like this before, How hard is it to fit, cut bumper etc and how long did it take to fit. Or does anyone know how much it would cost to have one fitted and where to get that done.
29 July 2005, 09:58 AM
#46
Scooby Regular
Thread Starter
Originally Posted by scoobyDAZZA
fitted a flea-bay fmic to mine a month ago,all looks fine,slightly dearer than 215 but still a bargain when it eventually came
i also have a my99-00 , , re the bov . . get 1 for a my98 and a samco straight reducer pipe 35-25mm . . fits a piece of pi55 then
i must do the magnet check though..lol
heres some pics of mine,
note the inner wing HAD to be cut and the pipe runs under the K+N
also a good idea to lag the pipe that runs over the turbo
daz
i also have a my99-00 , , re the bov . . get 1 for a my98 and a samco straight reducer pipe 35-25mm . . fits a piece of pi55 then
i must do the magnet check though..lol
heres some pics of mine,
note the inner wing HAD to be cut and the pipe runs under the K+N
also a good idea to lag the pipe that runs over the turbo
daz
29 July 2005, 10:33 AM
#47
Scooby Regular
iTrader: (2)
Join Date: May 2000
Location: Class record holder at Pembrey Llandow Goodwood MIRA Hethel Blyton Curborough Lydden and Snetterton
Posts: 8,626
Likes: 0
Received 0 Likes
on
0 Posts
For hybrid/Ebay fitting read delboy's thread http://bbs.scoobynet.co.uk/showthread.php?t=295624
Here are a few pics of mine
DV wise, using a MY98 Forge recirc I needed:
Samco 35mm elbow
Samco 35mm to 25mm straight reducer
Approx 400mm of 25mm pipe
Here are a few pics of mine
DV wise, using a MY98 Forge recirc I needed:
Samco 35mm elbow
Samco 35mm to 25mm straight reducer
Approx 400mm of 25mm pipe
29 July 2005, 06:44 PM
#48
Scooby Regular
Join Date: Feb 2003
Location: Zed Ess Won Hay Tee
Posts: 21,611
Likes: 0
Received 0 Likes
on
0 Posts
its all good as far as i am concerned, as long as it arrives
the kit dazza has is the autobhan version, although i do belive the seller said sumwhere it was not an autobhan kit?
TBH im doubtfull of noticable gains over one make then another
as long as there not leaking or anything daft like that, and there in the right place.
the kit dazza has is the autobhan version, although i do belive the seller said sumwhere it was not an autobhan kit?
TBH im doubtfull of noticable gains over one make then another
as long as there not leaking or anything daft like that, and there in the right place.
30 July 2005, 12:21 AM
#49
I've just bought one of these as well, I remember seeing scoobyDAZZA's car at SBO and thinking the intercooler looked really good, didn't realise at the time which one it was.
Cant wait for it to arive now.
Cant wait for it to arive now.
01 August 2005, 12:16 PM
#52
Originally Posted by StickyMicky
did anybody ask the seller when they were due to be deliverd??
"Terms & Conditions
Some modifications my be needed to fit any of our items we sell. Please make sure you
purchase the correct item as we cannot exchange once bought.
We take no responsibility for any damaged caused whilst fitting our items
If we are unable to deliver within a 28 day period then buyer and seller will agree mutually not
to complete the transaction and a full refund will be given. If you however decide that you still want the
item we will endeavour to get it to you as soon as is possible."
So hoping to receive by the 19th Aug...
01 August 2005, 03:47 PM
#53
Scooby Regular
Thread Starter
Originally Posted by dr_jones
I didn't but he had this on the add:
"Terms & Conditions
Some modifications my be needed to fit any of our items we sell. Please make sure you
purchase the correct item as we cannot exchange once bought.
We take no responsibility for any damaged caused whilst fitting our items
If we are unable to deliver within a 28 day period then buyer and seller will agree mutually not
to complete the transaction and a full refund will be given. If you however decide that you still want the
item we will endeavour to get it to you as soon as is possible."
So hoping to receive by the 19th Aug...
"Terms & Conditions
Some modifications my be needed to fit any of our items we sell. Please make sure you
purchase the correct item as we cannot exchange once bought.
We take no responsibility for any damaged caused whilst fitting our items
If we are unable to deliver within a 28 day period then buyer and seller will agree mutually not
to complete the transaction and a full refund will be given. If you however decide that you still want the
item we will endeavour to get it to you as soon as is possible."
So hoping to receive by the 19th Aug...
what contact you guys had back from this seller? Noticed a few others going for the £280 mark... they did appear to be in the UK with next day delivery...
01 August 2005, 07:18 PM
#54
Scooby Regular
Join Date: Dec 2002
Location: devon
Posts: 2,944
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by StickyMicky
its all good as far as i am concerned, as long as it arrives
the kit dazza has is the autobhan version, although i do belive the seller said sumwhere it was not an autobhan kit?
.
the kit dazza has is the autobhan version, although i do belive the seller said sumwhere it was not an autobhan kit?
.
no idea.lol. i just bought the bloody thing . . is it good or not ?
i did buy mine from somewhere else though
but they do look the same
still aint done the magnet check,forgot <d'oh> , and now the scoobs in the garage getting the gauges fitted
daz
01 August 2005, 09:58 PM
#56
Forgot to add my name to the list in my last post!!
####################
1. SCOOBYD00
2. FerryScoob
3. StickyMicky
4. dr_jones
5. dbrad
6. bruce
7.
#####################
####################
1. SCOOBYD00
2. FerryScoob
3. StickyMicky
4. dr_jones
5. dbrad
6. bruce
7.
#####################
01 August 2005, 10:07 PM
#57
Scooby Regular
Thread Starter
Originally Posted by bruce
Forgot to add my name to the list in my last post!!
####################
1. SCOOBYD00
2. FerryScoob
3. StickyMicky
4. dr_jones
5. dbrad
6. bruce
7.
#####################
####################
1. SCOOBYD00
2. FerryScoob
3. StickyMicky
4. dr_jones
5. dbrad
6. bruce
7.
#####################
None as cheap as our deal tho. We shall see..
03 August 2005, 12:32 AM
#58
Scooby Regular
iTrader: (1)
Join Date: May 2005
Location: richmond,surrey
Posts: 861
Likes: 0
Received 0 Likes
on
0 Posts
hello people,
im looking into buying one of these fmic,
could you pls keep us informed with how you got on or get on with this item(the ones of ebay),
thanks in advance and thanks for your time.
im looking into buying one of these fmic,
could you pls keep us informed with how you got on or get on with this item(the ones of ebay),
thanks in advance and thanks for your time.
