Rolling Road session - Luton
Thanks for thoses who made the RR today 
Results as follows:
1.S.Giliberti**Sooby**243bhp
2.G.Houghton**Sooby**258bhp
3.M.Persaud**Sooby**230bhp
4.M.Andrews**F/S/Cosworth**301bhp
5.D.Collins**Seat Leon**190bhp
6.R.Howlett**Fiat Coupe**251bhp
7.R.Sconard**Fiat Coupe**241bhp
8.M.Elder**Fiat Coupe**249bhp
9.C.Burgess**Fiat Coupe**275bhp
10.M.Burns**Fiat Coupe**215bhp
11.K.Tyahooa**Fiat Coupe**259bhp
12.D.Bartlett**Fiat Coupe**222bhp
13.R.Chambers**Clio V6**218bhp
14.J.Hurst**Fiat Coupe**245bhp
15.N.Hudson**Fiat Coupe**257bhp
16.A.Muncie**Fiat Coupe**310bhp
17.B.Dha**Scooby**352bhp
18.B.Tojazic**Fiat Coupe**266bhp
19.S.Choi (S reg)Fiat Coupe 272bhp
20.S.Choi (T reg)Fiat Coupe 254bhp
21.M.Greenwood**Fiat Coupe**273bhp
22.A.Sheikh**Fiat Coupe**344bhp
23.B.Sheikh**Fiat Coupe**341bhp
24.C.France**Punto Hgt**152bhp

Results as follows:
1.S.Giliberti**Sooby**243bhp
2.G.Houghton**Sooby**258bhp
3.M.Persaud**Sooby**230bhp
4.M.Andrews**F/S/Cosworth**301bhp
5.D.Collins**Seat Leon**190bhp
6.R.Howlett**Fiat Coupe**251bhp
7.R.Sconard**Fiat Coupe**241bhp
8.M.Elder**Fiat Coupe**249bhp
9.C.Burgess**Fiat Coupe**275bhp
10.M.Burns**Fiat Coupe**215bhp
11.K.Tyahooa**Fiat Coupe**259bhp
12.D.Bartlett**Fiat Coupe**222bhp
13.R.Chambers**Clio V6**218bhp
14.J.Hurst**Fiat Coupe**245bhp
15.N.Hudson**Fiat Coupe**257bhp
16.A.Muncie**Fiat Coupe**310bhp
17.B.Dha**Scooby**352bhp
18.B.Tojazic**Fiat Coupe**266bhp
19.S.Choi (S reg)Fiat Coupe 272bhp
20.S.Choi (T reg)Fiat Coupe 254bhp
21.M.Greenwood**Fiat Coupe**273bhp
22.A.Sheikh**Fiat Coupe**344bhp
23.B.Sheikh**Fiat Coupe**341bhp
24.C.France**Punto Hgt**152bhp
[QUOTE=WRX Wannabe]Thanks for thoses who made the RR today 
Thanks for organising it and allowing us to join in with the Coupe's. It was a good turn out and produced some good figures on the rolling road.
P.S
I'll be back after a TEK3

Thanks for organising it and allowing us to join in with the Coupe's. It was a good turn out and produced some good figures on the rolling road.
P.S
I'll be back after a TEK3
Former Sponsor
iTrader: (234)
Joined: Jan 2003
Posts: 14,406
Likes: 0
From: Over 500ft/lbs of torque @ just 1.1bar
Didnt get to meet you Gerry as I think you had been and gone by the time I got there.
What mods did you have and did the figures meet your expectations?
Bob
What mods did you have and did the figures meet your expectations?
Bob
Hi Bob,
I was hoping to get to meet you but had to get away early. Was it you driving in as I left in the white wagon? Are you B.Dha? If so, congratulations, top billing
Disappointed? More surprised or bewildered.
I was hoping to get to meet you but had to get away early. Was it you driving in as I left in the white wagon? Are you B.Dha? If so, congratulations, top billing

Disappointed? More surprised or bewildered.
Last edited by Houghton; Apr 20, 2005 at 01:40 PM.
Former Sponsor
iTrader: (234)
Joined: Jan 2003
Posts: 14,406
Likes: 0
From: Over 500ft/lbs of torque @ just 1.1bar
Originally Posted by Houghton
Hi Bob,
I was hoping to get to meet you but had to get away early. Was it you driving in as I left in the white wagon? Are you B.Dha? If so, congratulations, top billing
Here's the mods:
2.5 block std internals
TD05/06 20g
Apexi ecu
550 injectors
De-cat
K&N
Walbro/FSE
FMIC
Gruppe-S headers
Apexi AVC-R
Lightened flywheel
AP Racing clutch
Samco inlet
Oh and an ali gear ****
Disappointed? More surprised or bewildered.
I was hoping to get to meet you but had to get away early. Was it you driving in as I left in the white wagon? Are you B.Dha? If so, congratulations, top billing

Here's the mods:
2.5 block std internals
TD05/06 20g
Apexi ecu
550 injectors
De-cat
K&N
Walbro/FSE
FMIC
Gruppe-S headers
Apexi AVC-R
Lightened flywheel
AP Racing clutch
Samco inlet
Oh and an ali gear ****

Disappointed? More surprised or bewildered.
Mine was DBM saloon.Cant believe you only made 258bhp with that spec
. What happened? Is it mapped and running right?Bob
Mapped by Andy F. Runs like a dream. You tell me what happened.
Got 300+ at PTS last Sept. with the original engine & VF23 turbo, so at this rate, with a few more mods, I'll be worse off than a standard UK on the rollers
BUT on the road
Maybe some chequered tape along the side next
Got 300+ at PTS last Sept. with the original engine & VF23 turbo, so at this rate, with a few more mods, I'll be worse off than a standard UK on the rollers
BUT on the road
Maybe some chequered tape along the side next
Former Sponsor
iTrader: (234)
Joined: Jan 2003
Posts: 14,406
Likes: 0
From: Over 500ft/lbs of torque @ just 1.1bar
Originally Posted by Houghton
Mapped by Andy F. Runs like a dream. You tell me what happened.
Got 300+ at PTS last Sept. with the original engine & VF23 turbo, so at this rate, with a few more mods, I'll be worse off than a standard UK on the rollers
BUT on the road
Maybe some chequered tape along the side next
Got 300+ at PTS last Sept. with the original engine & VF23 turbo, so at this rate, with a few more mods, I'll be worse off than a standard UK on the rollers
BUT on the road
Maybe some chequered tape along the side next

Bob
He couldn't understand nor explain and as you know, the turnaround was so rapid, there wasn't really time to discuss it. He suggested booking the car in one day this week for further runs.
I'm going to Scotland next week so I'll pop in to see Andy.
Did a track day with MLR on Friday at Snetterton and a couple of people came up to ask about mods as it pulled very well along the straights
I'm going to Scotland next week so I'll pop in to see Andy.
Did a track day with MLR on Friday at Snetterton and a couple of people came up to ask about mods as it pulled very well along the straights
Thread
Thread Starter
Forum
Replies
Last Post




