Thanks to some practical joker, I'll start another 'Dorset meet for Feb' thread......
Scooby Regular
Joined: Sep 2004
Posts: 8,334
Likes: 0
From: poole
Originally Posted by RON
Paul, the only real thing you need to do is fit a little black box which stops the CEL coming on all the time!!
Will chat Monday!!
Will chat Monday!!
Scooby Regular
Joined: Mar 2002
Posts: 1,485
Likes: 0
From: Poole - in an Isuzu D-Max LE (Prodrive Version) Gamer Tag "Coin Slot"
Originally Posted by pauld37
Cheers Ron. The group buy has been extended til Wednesday now, so still have time
http://www.j-w-racing.co.uk/acatalog/subaruexhaust.html
Most suppliers will try and push you down the Ecutek route because theres a lot more money to be made, the software will then ignore the 'cat efficiency below threshold error'.
It's not a diy job to fit the device unless you're good with a soldering iron and reading small circuit diagrams. (Triton would be best bet).
My 01 Bug PPP went from 245ish to 275bhp-265lb/ft with full de-cat, including the up-pipe that also has a small cat in it and the turbo came in about 750rpm earlier.
You'll prolly find your car starts to chew up EGT sensors reguarly with a full de-cat as the temperatures in the up-pipe increase without the cat.
And get a knock-link and boost guage, very important.
Obviously kiss goodbye to any remaing warranty you may have.
Scooby Regular
Joined: Mar 2002
Posts: 1,485
Likes: 0
From: Poole - in an Isuzu D-Max LE (Prodrive Version) Gamer Tag "Coin Slot"
lol Mark. 
Modding cars is so 'chav'
Actually I'm waiting for Blitz to pull their fingers from their asses and sort me out a cat back system for the Leggy... should be enough for 260 ponies
Modding cars is so 'chav'
Actually I'm waiting for Blitz to pull their fingers from their asses and sort me out a cat back system for the Leggy... should be enough for 260 ponies
Scooby Regular
Joined: Apr 2002
Posts: 7,333
Likes: 0
From: Bournemouth - 5x Ex Impreza owner. 997 GT3 CS.
Ron, can you organise a Sunday day time one next? Sounds like there are a few tasty cars around now, and would be good to have a look at the cars. Also invite Glen and the Max Power EVo posse along
I may have project 400 sorted by then
(Maybe a little less)MB
Scooby Regular
Joined: Sep 2004
Posts: 8,334
Likes: 0
From: poole
Originally Posted by G00ner
As Rons says, you will need the 02 CEL fix, there used to be numerous companies selling these, but they aren't quite so common now.
http://www.j-w-racing.co.uk/acatalog/subaruexhaust.html
Most suppliers will try and push you down the Ecutek route because theres a lot more money to be made, the software will then ignore the 'cat efficiency below threshold error'.
It's not a diy job to fit the device unless you're good with a soldering iron and reading small circuit diagrams. (Triton would be best bet).
My 01 Bug PPP went from 245ish to 275bhp-265lb/ft with full de-cat, including the up-pipe that also has a small cat in it and the turbo came in about 750rpm earlier.
You'll prolly find your car starts to chew up EGT sensors reguarly with a full de-cat as the temperatures in the up-pipe increase without the cat.
And get a knock-link and boost guage, very important.
Obviously kiss goodbye to any remaing warranty you may have.
http://www.j-w-racing.co.uk/acatalog/subaruexhaust.html
Most suppliers will try and push you down the Ecutek route because theres a lot more money to be made, the software will then ignore the 'cat efficiency below threshold error'.
It's not a diy job to fit the device unless you're good with a soldering iron and reading small circuit diagrams. (Triton would be best bet).
My 01 Bug PPP went from 245ish to 275bhp-265lb/ft with full de-cat, including the up-pipe that also has a small cat in it and the turbo came in about 750rpm earlier.
You'll prolly find your car starts to chew up EGT sensors reguarly with a full de-cat as the temperatures in the up-pipe increase without the cat.
And get a knock-link and boost guage, very important.
Obviously kiss goodbye to any remaing warranty you may have.
Scooby Regular
Joined: Sep 2003
Posts: 850
Likes: 0
From: poole
Originally Posted by G00ner
As Rons says, you will need the 02 CEL fix, there used to be numerous companies selling these, but they aren't quite so common now.
http://www.j-w-racing.co.uk/acatalog/subaruexhaust.html
Most suppliers will try and push you down the Ecutek route because theres a lot more money to be made, the software will then ignore the 'cat efficiency below threshold error'.
It's not a diy job to fit the device unless you're good with a soldering iron and reading small circuit diagrams. (Triton would be best bet).
My 01 Bug PPP went from 245ish to 275bhp-265lb/ft with full de-cat, including the up-pipe that also has a small cat in it and the turbo came in about 750rpm earlier.
You'll prolly find your car starts to chew up EGT sensors reguarly with a full de-cat as the temperatures in the up-pipe increase without the cat.
And get a knock-link and boost guage, very important.
Obviously kiss goodbye to any remaing warranty you may have.
http://www.j-w-racing.co.uk/acatalog/subaruexhaust.html
Most suppliers will try and push you down the Ecutek route because theres a lot more money to be made, the software will then ignore the 'cat efficiency below threshold error'.
It's not a diy job to fit the device unless you're good with a soldering iron and reading small circuit diagrams. (Triton would be best bet).
My 01 Bug PPP went from 245ish to 275bhp-265lb/ft with full de-cat, including the up-pipe that also has a small cat in it and the turbo came in about 750rpm earlier.
You'll prolly find your car starts to chew up EGT sensors reguarly with a full de-cat as the temperatures in the up-pipe increase without the cat.
And get a knock-link and boost guage, very important.
Obviously kiss goodbye to any remaing warranty you may have.
Scooby Regular
Joined: Apr 2002
Posts: 7,333
Likes: 0
From: Bournemouth - 5x Ex Impreza owner. 997 GT3 CS.
Up pipe connects from the headers into the turbo, downpipe is the longer pipe on the outlet of the turbo which goes down under the drivers floor.
Dont think a CEL fix is needed on non bug eye, but check with the exhaust supplier.
MB
Dont think a CEL fix is needed on non bug eye, but check with the exhaust supplier.
MB
Scooby Regular
Joined: Mar 2002
Posts: 1,485
Likes: 0
From: Poole - in an Isuzu D-Max LE (Prodrive Version) Gamer Tag "Coin Slot"
You'll deffo need a CEL fix if you decat, Bugeye WRX's had a 3rd cat, (STi's didn't) and Blobbys have two.
Nice day today, gave my car a good seeing to with Megs, bet it bloody rains tonight...
Nice day today, gave my car a good seeing to with Megs, bet it bloody rains tonight...
Scooby Regular
Joined: May 2001
Posts: 758
Likes: 0
From: Ford Pick up, Yee Haa
Originally Posted by Dark Blue Mark
Also invite Glen and the Max Power EVo posse along
MB
Tucked mine away in the garage though
Thread Starter
Scooby Regular
Joined: Sep 2000
Posts: 10,011
Likes: 1
From: Deepest Darkest Dorset!!
no worries..... you're not by chance one of the guys that used to come along with Dean, the sprayer guy from christchurch are you?? I ve not heard anything from him in a very long time....
Scooby Regular
Joined: Mar 2002
Posts: 1,485
Likes: 0
From: Poole - in an Isuzu D-Max LE (Prodrive Version) Gamer Tag "Coin Slot"
Originally Posted by dean harris
Hi Shane,
Did I read that right?That you have given your car a good seeing to with "Smeg"
I hope you and all the dorset crew are keeping well(including the imposters)
Regards
Dean
Did I read that right?That you have given your car a good seeing to with "Smeg"
I hope you and all the dorset crew are keeping well(including the imposters
)Regards
Dean
Trust you to turn the conversation blue... although Soulgirl would have done that soon anyways
I can't put mine in the garage because my girlfriends old Clio is in there.
I wonder if there's a Dorset Events section on the Lancer forums? might make it more interesting if we all join forces when the nights are lighter?
I'd quite like an Evo myself as a third car.
I want one now 
