Wagons, stand up and show yourselfs!!
#1471
Scooby Regular
iTrader: (41)
Join Date: Nov 2003
Location: in the woods...........555 Wagon Sqn
Posts: 13,347
Received 55 Likes
on
42 Posts
Hi guys,
I have a 54 WRX Wagon with PPP that was already fitted when I bought the car second-hand last year. Can someone please point me in the direction of the performance stats (0-62 etc) for this car, please? I realise every car is slightly different, but just wondered what the quoted performance figures were like.
Oh, and I will be taking some pics of the car...it's on my ever-increasing to do list.
Cheers,
toddx
I have a 54 WRX Wagon with PPP that was already fitted when I bought the car second-hand last year. Can someone please point me in the direction of the performance stats (0-62 etc) for this car, please? I realise every car is slightly different, but just wondered what the quoted performance figures were like.
Oh, and I will be taking some pics of the car...it's on my ever-increasing to do list.
Cheers,
toddx
#1474
Scooby Regular
Join Date: Jan 2006
Location: The Darkside - Formerly Secret 555 Wgn Sqn Bunker
Posts: 3,032
Likes: 0
Received 0 Likes
on
0 Posts
Cheers M8
#1476
Scooby Regular
Join Date: Jan 2006
Location: The Darkside - Formerly Secret 555 Wgn Sqn Bunker
Posts: 3,032
Likes: 0
Received 0 Likes
on
0 Posts
Update - Project Type-W Pics
It LIVES !!!! ...The engine is back in and running
JDM Sti9 Rods + Nitrided crank, acl bearings, mahle pistons lurking within
JDM Sti9 Rods + Nitrided crank, acl bearings, mahle pistons lurking within
#1478
It LIVES !!!! ...The engine is back in and running
Where did you get the engine done, or did you build it yourself?
Mine sti5 wagon has just started knocking so im looking for ideas at the moment.
#1479
Scooby Regular
Join Date: Jun 2006
Location: edinburgh scoobies-555 wagon squadron- s.w.a.t.s.a.r
Posts: 241
Likes: 0
Received 0 Likes
on
0 Posts
here's mine my94
hks stainless exhaust
hks green mushy filter
hks stand alone ecu
16" safari speedline mcrae alloys
3point sparco harness
hks stainless exhaust
hks green mushy filter
hks stand alone ecu
16" safari speedline mcrae alloys
3point sparco harness
#1480
Scooby Regular
Join Date: Jan 2006
Location: The Darkside - Formerly Secret 555 Wgn Sqn Bunker
Posts: 3,032
Likes: 0
Received 0 Likes
on
0 Posts
I had it done by Len at Subaru 4 you in newbury. I spoke to all the tuners to get some quotes and hear their ideas and suggestions of what they would do - API, ScoobyClinic, Roger Clark, TSL etc
In the end i whent with Len as for me had had the best attitude and the package he put together was the best out of all of them for what I wanted.
I guess it depends what your budget is and what you want and your power aspirations.
I ruled out the 2.5 early on due to finances needed to do a proper job. And i ruled out the straight rebuild as it was going to cost nearly the same to have uprated parts in it. Len worked me out a good deal with a Nitrided sti9 crank, and rods, acl bearings, mahle pistons. But depends on how the rest of your engine looks, I needed a rebore and pistons were shot anyway, otherwise may have got away with those. flywheel was ok but clutch goosed, and you may find you heads are gone too, need reconditioning , luckily were ok still.
Len has had 5 rebuilds in recently I think, and the P1 has had same as me. so the sti9 route is getting very popular for sti5/ pi owners as its a logical step, why rebuild with standard internals when the sti9 ones come out with not much in it. We looked at a complete sti8/9/10 shortblock and was about 2k from subaru plus a 500 surcharge - when you can get a rebuild with the mahle pistons. acl bearings etc for circa 3k theres not much in it.
let us know what your thinking of for your plans
#1481
Cheers for the info.
I was thinking of going a similar route to you with sti9 crank and forged pistons. Im hopefully going to go for forged rods aswell. Before the knocking I was running a gt30 turbo, 740cc injectors on an apexi power fc with the usual mods, exhaust + headers. I was only running 1.4 bar but a wrong gearchange killed it off. So now im looking to make the most of the turbo.
Im at the stage of ringing around for prices and advice so any info is greatly received. I will probably be doing most of the work myself but will get the bottom end built by someone else as Im not that brave yet.
I was thinking of going a similar route to you with sti9 crank and forged pistons. Im hopefully going to go for forged rods aswell. Before the knocking I was running a gt30 turbo, 740cc injectors on an apexi power fc with the usual mods, exhaust + headers. I was only running 1.4 bar but a wrong gearchange killed it off. So now im looking to make the most of the turbo.
Im at the stage of ringing around for prices and advice so any info is greatly received. I will probably be doing most of the work myself but will get the bottom end built by someone else as Im not that brave yet.
Last edited by wrxginge; 25 February 2007 at 09:10 AM.
#1482
Scooby Regular
iTrader: (41)
Join Date: Nov 2003
Location: in the woods...........555 Wagon Sqn
Posts: 13,347
Received 55 Likes
on
42 Posts
you shouldn't have too, the impreza ones just hang off the bumper fittings. all you need do is undo the nuts and jiggle it around a little and the whole thing will come off
#1484
If you look at the picture, the bracket disappears up into the body, presumably, behind the bumper?
#
Pete
#1487
#1490
It actually got a clean splashing through the puddles Was a good little route Mangel.
Heres a little clip of my 1st ever 1/4 mile run at the pod last month
TinyPic Video and Photo Sharing
Hoping to break into 12's next time round.
#1495
Scooby Regular
Join Date: Jan 2006
Location: The Darkside - Formerly Secret 555 Wgn Sqn Bunker
Posts: 3,032
Likes: 0
Received 0 Likes
on
0 Posts
#1496
#1497
It pains me to read these threads.... I'll be selling my 99 JDM STi Version 5 Wagon shortly ... just been made redundant only had it since Jan as well !! Any Ideas what the going rate is for a clean example . 1 previous keeper and full history from 1999 etc... So I Know what to put her up for
cheers
cheers
Last edited by 16v6n; 27 February 2007 at 01:43 PM.
#1498
Scooby Regular
iTrader: (41)
Join Date: Nov 2003
Location: in the woods...........555 Wagon Sqn
Posts: 13,347
Received 55 Likes
on
42 Posts
is it a hybred 18g and if so who did the work...am interested as I have one of Andy F's 18g but its going to be a while before I can fit it
#1499
All parts were supplied and fitted by Zen Performance - Performance upgrade solutions for Japanese cars. It does make a really nice all rounder, and once on boost pulls well.
#1500
Scooby Regular
iTrader: (41)
Join Date: Nov 2003
Location: in the woods...........555 Wagon Sqn
Posts: 13,347
Received 55 Likes
on
42 Posts
All parts were supplied and fitted by Zen Performance - Performance upgrade solutions for Japanese cars. It does make a really nice all rounder, and once on boost pulls well.
have you had the car dynoed...be interesting to see how similar they are as i'll be keeping my standard ported headers and mines a phase two with a standard TEK3'd ECU...who mapped your car?
sorry loads of q's
Last edited by trails; 27 February 2007 at 06:17 PM.