WRX + STi mud flaps!
#151
hmm yes there is a plastic clip, but that would have tied up with the centre of the flap.
I fixed the small angle bracket to the end of the flap bracket and after fitting flap bracket temporarally I marked where the small bracket would mount to the inner wing then drilled a hole there and fixed it.
Seems to be fine, I did look into using the area that the clip was in but to me it was in the wrong area to get a good strong fitting.
I fixed the small angle bracket to the end of the flap bracket and after fitting flap bracket temporarally I marked where the small bracket would mount to the inner wing then drilled a hole there and fixed it.
Seems to be fine, I did look into using the area that the clip was in but to me it was in the wrong area to get a good strong fitting.
#152
Same here - had to drill a 1/4" hole on rears to fit them. It's easier if you pilot drill them first with something like ø1/8" rather than trying to plough through with the ø1/4" / ø5.5mm respectively.
Other than that, went on OK apart from letting c-clip slide down inside trim on first attempt, mucho cursing and fishing later, put bolt through as soon as clip in to stop it dropping
Megabusa - thanks for the quick response re the brackets.
Apple
edditted fur spolling
[Edited by Apple - 8/31/2002 9:12:00 PM]
Other than that, went on OK apart from letting c-clip slide down inside trim on first attempt, mucho cursing and fishing later, put bolt through as soon as clip in to stop it dropping
Megabusa - thanks for the quick response re the brackets.
Apple
edditted fur spolling
[Edited by Apple - 8/31/2002 9:12:00 PM]
#154
Well it looks as though my interpretation of the Japanese instruction was slightly wrong regarding the rear brackets. I will modify the fitting instructions for the rears. If anyone needs the "version 2" rear mud flap instructions then please e-mail me.
#157
Scott,
Just tried to send you mail to scott@evo-6.com but the message bounced back. Is there another address I can mail you at, I want to order a full set of WRblue with white STi logo mud flaps from you.
Thanks,
Phil
Just tried to send you mail to scott@evo-6.com but the message bounced back. Is there another address I can mail you at, I want to order a full set of WRblue with white STi logo mud flaps from you.
Thanks,
Phil
#160
Magabusa I take you have a westfield, in which case you should know me and fluke-motorsport with are carbon cars.
Anyhow, I have been though all 8 pages on this link and can not find a price.
Anyhow, I have been though all 8 pages on this link and can not find a price.
#165
Megabussa
Are you seriously planning to produce a set of mudflaps for the non-fugly impreza? If you're not, I may well do it.
If anyone doesn't wanna wait, post here, and I might make some!!!!
Are you seriously planning to produce a set of mudflaps for the non-fugly impreza? If you're not, I may well do it.
If anyone doesn't wanna wait, post here, and I might make some!!!!
#168
as i said, I'm gonna make some if the demand is there - graham goode are selling, for example, the subaru stars emblem mud flaps for about £500 for 4 - I'd be looking at £250 if anyone was interested - post here if you are
#170
Oh yes! Looking goooood (if I may say so myself?).
Regarding the classic shape Scooby flaps;
I'm sure I will make some, but have a couple of major events coming up, and don't want to make promises I can't keep. I have a large mailing list of people with an interest in them, and I will contact you all when the time is right.
Cheers,
'busa
Regarding the classic shape Scooby flaps;
I'm sure I will make some, but have a couple of major events coming up, and don't want to make promises I can't keep. I have a large mailing list of people with an interest in them, and I will contact you all when the time is right.
Cheers,
'busa
#172
Scooby Regular
Just thought you lot might be interested with a few pictures of the flaps on an STI UK.
These match the car just perfect, anyone interested in these just get them!
Thanks Scott
Rob.
These match the car just perfect, anyone interested in these just get them!
Thanks Scott
Rob.
#175
Scooby Regular
Join Date: Apr 2002
Location: Somewhere i shouldnt be.......But well worth going! SORN Scooby !!
Posts: 1,953
Received 0 Likes
on
0 Posts
hi megabusa,
def interested mate,please mail/ post details for supply of a set for WR blue STI7!!!??
cheers ROB......
p.s. with STI logo.
def interested mate,please mail/ post details for supply of a set for WR blue STI7!!!??
cheers ROB......
p.s. with STI logo.