My new MY15 (New shape) STI Daily driver
#151
Scooby Regular
#152
You do need it for the adjustable rear arm bushes I had fitted, lowering of car etc.
#153
Scooby Regular
Ok cool! I had a look on the whiteline site, and they said they did, but my thinking was the same as yours. have you had your geo setup done yet ? Having mine done Tuesday with the anti lift kit and bump steer correction kit I’ve bought and was gonna ask for the prodrive setup on mine.
#155
Oh I should also add that for the rear of my car to allow for camber correct Whiteline offer 2 solutions as below:
Replacement rear arm top bushes that make the top arm adjustable inwards and outwards to create +/- 0.75deg camber adjustment, as seen below:
Whiteline also offer a replacement adjustable bottom arm which allows for a massive +/- 2.5 deg of camber adjustment. See below:
I opted for the first solution on my car, the replacement top arm bushes as I didn't need a lot of camber correction and they were the cheaper of the 2 solutions. The top arms are not too difficult to remove from the car in general if you know what you're doing. The bushes are a bit of a **** to remove from the top arms themselves and the kit is straight forward to install once the old bushes are out. All in all the labour to do the top arm bushes outweighs the labour costs to fit a bottom arm, which is generally very simple. So on the whole, if I did this again I would most certainly opt for the bottom arms rather than the top bushes. All works out similar in price at the end of the day.
The biggest issue with the adjustable top arm bushes is that once the car is back together with wheels re-fitted and on the ramp with the tracking gear fitted it is completely impossible to get access to adjust the bolts on the top arms and adjust the camber. You need to remove the tracking equipment (cocking up the tracking readings) and the wheels to adjust things, then put it all back together again and take new measurements hoping you've adjusted enough. So a total pain to set things up. Access to the bottom arms for adjustment is a complete doddle.
So if anyone wants adjustable camber on the rear of their MY15 the please please pay the extra and get the adjustable bottom arms, not the top arm bushes!
Replacement rear arm top bushes that make the top arm adjustable inwards and outwards to create +/- 0.75deg camber adjustment, as seen below:
Whiteline also offer a replacement adjustable bottom arm which allows for a massive +/- 2.5 deg of camber adjustment. See below:
I opted for the first solution on my car, the replacement top arm bushes as I didn't need a lot of camber correction and they were the cheaper of the 2 solutions. The top arms are not too difficult to remove from the car in general if you know what you're doing. The bushes are a bit of a **** to remove from the top arms themselves and the kit is straight forward to install once the old bushes are out. All in all the labour to do the top arm bushes outweighs the labour costs to fit a bottom arm, which is generally very simple. So on the whole, if I did this again I would most certainly opt for the bottom arms rather than the top bushes. All works out similar in price at the end of the day.
The biggest issue with the adjustable top arm bushes is that once the car is back together with wheels re-fitted and on the ramp with the tracking gear fitted it is completely impossible to get access to adjust the bolts on the top arms and adjust the camber. You need to remove the tracking equipment (cocking up the tracking readings) and the wheels to adjust things, then put it all back together again and take new measurements hoping you've adjusted enough. So a total pain to set things up. Access to the bottom arms for adjustment is a complete doddle.
So if anyone wants adjustable camber on the rear of their MY15 the please please pay the extra and get the adjustable bottom arms, not the top arm bushes!
#157
Ok cool! I had a look on the whiteline site, and they said they did, but my thinking was the same as yours. have you had your geo setup done yet ? Having mine done Tuesday with the anti lift kit and bump steer correction kit I’ve bought and was gonna ask for the prodrive setup on mine.
#158
Scooby Regular
The info comes from the various workshop manuals that I've found available on line, although I did buy my first set of paper manuals back in1997 and have purchased from Subaru the manuals for all the models I've owned.
The newer manuals (from MY06 for the Impreza) are now a hybrid version which is read through a browser with only parts being in pdf format (wiring diagrams) as it's designed to link in with SSM.
My MY11 WRX/WRXSTI version DVD includes MY08/09 and10 as well.
My MY15 WRX/WRXSTI version is a single MY version and is publication No:G1190G-DVD-E
.
#160
Scooby Regular
#162
Since putting the springs on my car I noticed that when driving at night the headlights were now pointing much further into the ground and illuminating less of the road, which indicated to me that in fact the front had dropped further than the rear of the car through the lowering process. The rear did always look lower to me and the front arch gap always looked bigger. Really wish I'd have measured the gaps on the standard springs, but the ride height was certainly not at the published heights before lowering.
Headlights all adjusted again now and sorted. Suspension seems to have settled just a little at the front and stayed where it was at the rear. Car looks more level now and about right. I'm going to do a full bolt check again soon on all the suspension.
My eagerly awaited aid package from AS Performance containing all the oil, coolant, pipes, washers, gaskets etc to finally fix my water leak has been hampered by the couriers sadly. Seems after playing football with the parcel it amazingly started leaking fluid of some sort and instead of contacting Alyn or myself they simply disposed of the whole thing and all my parts. Great! Poor Alyn is now having to re-order everything and track down more parts for me for a second time. Really can't fault AS, they are great. I'm just incredibly unlucky at the moment it would seem!
Headlights all adjusted again now and sorted. Suspension seems to have settled just a little at the front and stayed where it was at the rear. Car looks more level now and about right. I'm going to do a full bolt check again soon on all the suspension.
My eagerly awaited aid package from AS Performance containing all the oil, coolant, pipes, washers, gaskets etc to finally fix my water leak has been hampered by the couriers sadly. Seems after playing football with the parcel it amazingly started leaking fluid of some sort and instead of contacting Alyn or myself they simply disposed of the whole thing and all my parts. Great! Poor Alyn is now having to re-order everything and track down more parts for me for a second time. Really can't fault AS, they are great. I'm just incredibly unlucky at the moment it would seem!
#163
Scooby Regular
iTrader: (20)
Since putting the springs on my car I noticed that when driving at night the headlights were now pointing much further into the ground and illuminating less of the road, which indicated to me that in fact the front had dropped further than the rear of the car through the lowering process. The rear did always look lower to me and the front arch gap always looked bigger. Really wish I'd have measured the gaps on the standard springs, but the ride height was certainly not at the published heights before lowering.
Headlights all adjusted again now and sorted. Suspension seems to have settled just a little at the front and stayed where it was at the rear. Car looks more level now and about right. I'm going to do a full bolt check again soon on all the suspension.
My eagerly awaited aid package from AS Performance containing all the oil, coolant, pipes, washers, gaskets etc to finally fix my water leak has been hampered by the couriers sadly. Seems after playing football with the parcel it amazingly started leaking fluid of some sort and instead of contacting Alyn or myself they simply disposed of the whole thing and all my parts. Great! Poor Alyn is now having to re-order everything and track down more parts for me for a second time. Really can't fault AS, they are great. I'm just incredibly unlucky at the moment it would seem!
Headlights all adjusted again now and sorted. Suspension seems to have settled just a little at the front and stayed where it was at the rear. Car looks more level now and about right. I'm going to do a full bolt check again soon on all the suspension.
My eagerly awaited aid package from AS Performance containing all the oil, coolant, pipes, washers, gaskets etc to finally fix my water leak has been hampered by the couriers sadly. Seems after playing football with the parcel it amazingly started leaking fluid of some sort and instead of contacting Alyn or myself they simply disposed of the whole thing and all my parts. Great! Poor Alyn is now having to re-order everything and track down more parts for me for a second time. Really can't fault AS, they are great. I'm just incredibly unlucky at the moment it would seem!
has this new model wrx-sti got the same self leveling headlight system as the hawkeye?
#164
Scooby Regular
#165
Some people make kit for the rear to adjust the angle of the self levelling sensor to compensate for lowered vehicles and height/angle changes. They are totally pointless. Each headlight can be adjusted with an 8mm spanner in seconds for free.
#167
Still waiting for my replacement parts from AS Performance. It took Alyn a while to source all the turbo bits last time. I really want to get it done and sorted now as winter is setting in.
Still using the car daily and still love it though. Puts a smile on my face every day.
Last week I purchased the HT Autos rear bumper diffuser for my car, as the car already has most of their kit fitted and I didn't want a massive overkill rear diffuser design. It arrived Friday so I fitted in yesterday (with help from my 5 year old).
I may modify it slightly to make it more discrete and get rid of some of the moustache look it has. I also want to see a little more of the standard rear bumper veines with it fitted so may change the way it's mounted to drop it down just a little further. Otherwise I quite like it.
Couple of pics.
Thanks for looking,
Still using the car daily and still love it though. Puts a smile on my face every day.
Last week I purchased the HT Autos rear bumper diffuser for my car, as the car already has most of their kit fitted and I didn't want a massive overkill rear diffuser design. It arrived Friday so I fitted in yesterday (with help from my 5 year old).
I may modify it slightly to make it more discrete and get rid of some of the moustache look it has. I also want to see a little more of the standard rear bumper veines with it fitted so may change the way it's mounted to drop it down just a little further. Otherwise I quite like it.
Couple of pics.
Thanks for looking,
#169
I intend to thin it down a little so the shape doesn't look as odd and probably fit threaded inserts into the underside of the standard bumper so I can drop it down just a little further, no more than 1 inch though. Like the shape of the standard bumper at the rear and would like to see more of it.
I really wanted the chargespeed rear diffuser, but I'm not paying the money for that unit. It's crazy.
This is how Mark had it at one point during development and I think personally it looks better. I'll be aiming for something along these lines but with slightly less trimming.
#177
Scooby Regular
iTrader: (20)
Still waiting for my replacement parts from AS Performance. It took Alyn a while to source all the turbo bits last time. I really want to get it done and sorted now as winter is setting in.
Still using the car daily and still love it though. Puts a smile on my face every day.
Last week I purchased the HT Autos rear bumper diffuser for my car, as the car already has most of their kit fitted and I didn't want a massive overkill rear diffuser design. It arrived Friday so I fitted in yesterday (with help from my 5 year old).
I may modify it slightly to make it more discrete and get rid of some of the moustache look it has. I also want to see a little more of the standard rear bumper veines with it fitted so may change the way it's mounted to drop it down just a little further. Otherwise I quite like it.
Couple of pics.
Thanks for looking,
Still using the car daily and still love it though. Puts a smile on my face every day.
Last week I purchased the HT Autos rear bumper diffuser for my car, as the car already has most of their kit fitted and I didn't want a massive overkill rear diffuser design. It arrived Friday so I fitted in yesterday (with help from my 5 year old).
I may modify it slightly to make it more discrete and get rid of some of the moustache look it has. I also want to see a little more of the standard rear bumper veines with it fitted so may change the way it's mounted to drop it down just a little further. Otherwise I quite like it.
Couple of pics.
Thanks for looking,