API engineering
#31
Scooby Regular
Been there just over 2 weeks now for a centre diff rebuild 😠 was told a few days, currently still chugging around in a green na wagon that pisses oil everywhere and the exhaust sounds like a banshee
#32
And mudsplat your in exact same boat as me mate, my hawkeye been there about 9/10 weeks with ringland failure and blown head gasket. Still waiting on spec for the build itself, from what iv been told my block has all be machined etc and just waiting to get put back together. Just want it back and get the engine run in haha hopefully won't be long now
#33
Nice phone call tonight......, should be getting my car back on Thursday, totally agree with Mighty Arsenal, they are very knowledgeable and I hope its just a blip. I'm very keen to change this thread into a very positive one for API. I've been involved in Motorsport for 20 years and understand how important reputation is.
#34
Good man, that's the exact phone call I'm waiting for. Was told last week should be running by end of this week but going by the previous time frames I've been given I'm expacting a couple of weeks still haha agree with you on the reputation part. It's everything these days, there reputation is what made me choose api for the build in the first place. Hopefully won't be long now though, keep us updated on how the car is once you got it though mate. Just can't wait to get mine back and get back out in it !!
#35
Scooby Regular
iTrader: (3)
Join Date: Jan 2013
Location: Oxford
Posts: 739
Likes: 0
Received 0 Likes
on
0 Posts
Hardly call it a blip I've used them a few times over the past few years and every time there has been miss comunication or unknown time of completion for the work.. Just aswell there prices are very competitive!
#36
Shame David has retired, for us not him ha, i used them when david was there, good work, but now he has gone, hmmm, glad i had my cambelt and oilpump done when i did a few yrs back
good luck guys
good luck guys
#40
#42
#44
Scooby Regular
Join Date: May 2013
Location: Cheshire
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Well my car ended up at a local garage as I got an engine management light come on six days later. It proved not to be anything API had done (Turned out to be lights related bizarely enough). However one of the gearbox seals was leaking so API had to send a new seal to local garage.
I realize stuff happens and it is just one of those things. API have also promised to foot the bill to fix the issue.
As to how it goes.. bloody quick. When I have it :/
I realize stuff happens and it is just one of those things. API have also promised to foot the bill to fix the issue.
As to how it goes.. bloody quick. When I have it :/
#45
yeah make you right there, there's always the possibility something like that could go wrong but fair play to them in footing the bill, rather not happen in the first place but hopefully wont be to major, what work did you have done ?
#47
I got the car back on Saturday, sounded awesome when they picked me up from the train station, runs well but has a running in map on it at the moment, I've done 350 miles so far and I'm truthfully loving it. Have been very helpful over the last week, kept me informed and reduced the stress. Ill post back when it's re mapped in a couple of weeks. Checking it daily for leaks and is not used any oil yet, which I'm surprised at after a rebuild.
Last edited by garethscott; 06 October 2015 at 09:08 PM.
#54
Scooby Regular
iTrader: (12)
#55
Scooby Regular
iTrader: (9)
I use Mark Thwaites at TDR Developments, Warwick
Just had a HG (and other usual bits and bobs - clutch etc) on my Forester STi and the job was nothing short of perfect
He said 2 weeks and it was bang on time
He detailed the pricing in an email and it was spot on in the final invoice
I went down mid work and had a look at my engine all in bits and took some nice pics and when I picked up the car the engine bay was pristine (had been steamed). All the clips and nuts and bolts he had taken off and refitted looked as if they hadn't been touched - in fact looked brand new
The engine has covered 2,000 miles now and is going strong and burns zero oil (less than it did before)
He also looks after my Type R and has rebuilt the gearbox and diff - both going strong thousands of hard miles later
Mine's not the black crank
Just had a HG (and other usual bits and bobs - clutch etc) on my Forester STi and the job was nothing short of perfect
He said 2 weeks and it was bang on time
He detailed the pricing in an email and it was spot on in the final invoice
I went down mid work and had a look at my engine all in bits and took some nice pics and when I picked up the car the engine bay was pristine (had been steamed). All the clips and nuts and bolts he had taken off and refitted looked as if they hadn't been touched - in fact looked brand new
The engine has covered 2,000 miles now and is going strong and burns zero oil (less than it did before)
He also looks after my Type R and has rebuilt the gearbox and diff - both going strong thousands of hard miles later
Mine's not the black crank
#56
Scooby Regular
Join Date: Mar 2008
Location: Aberdare / Daventry
Posts: 5,365
Likes: 0
Received 0 Likes
on
0 Posts
I use Mark Thwaites at TDR Developments, Warwick
Just had a HG (and other usual bits and bobs - clutch etc) on my Forester STi and the job was nothing short of perfect
He said 2 weeks and it was bang on time
He detailed the pricing in an email and it was spot on in the final invoice
I went down mid work and had a look at my engine all in bits and took some nice pics and when I picked up the car the engine bay was pristine (had been steamed). All the clips and nuts and bolts he had taken off and refitted looked as if they hadn't been touched - in fact looked brand new
The engine has covered 2,000 miles now and is going strong and burns zero oil (less than it did before)
He also looks after my Type R and has rebuilt the gearbox and diff - both going strong thousands of hard miles later
Mine's not the black crank
Just had a HG (and other usual bits and bobs - clutch etc) on my Forester STi and the job was nothing short of perfect
He said 2 weeks and it was bang on time
He detailed the pricing in an email and it was spot on in the final invoice
I went down mid work and had a look at my engine all in bits and took some nice pics and when I picked up the car the engine bay was pristine (had been steamed). All the clips and nuts and bolts he had taken off and refitted looked as if they hadn't been touched - in fact looked brand new
The engine has covered 2,000 miles now and is going strong and burns zero oil (less than it did before)
He also looks after my Type R and has rebuilt the gearbox and diff - both going strong thousands of hard miles later
Mine's not the black crank
#57
Been waiting nearly 15 weeks on an engine build that was told would take 4-6 weeks, getting ridiculous now!! Nothing I can do but wait, each time I think I'm close there's another reason why it's not done yet...
#60
Update
Just been back down after running it in for a 1000 miles, had an oil and filter change and then popped over to Mark Thwaites at TDR Developments, Warwick for a new map. WOW it feels like a great car now, brings a smile to my face. Simon has ended up doing a great job and I'm now happy. Ill post back in a 1000 miles.