scooby project . stud 7 years and in a bit of bad state.
Only a couple. But we taken the battery and water bottle off as putting trickle charge in and cleaning water bottle as it was black inside due to crud just gonna up load ones I've got so far .
The black leather seats in my WRX SL were in amazing condition considering the age but a wipe over with the 'matched' Gliptone dye and they look brand spanking new now, and it's a doddle to use.
Gliptone is the way to go for a colour change as well.
Good luck with the project.
I was just being polite by not saying 'ditch the magnolia hide!'
The black leather seats in my WRX SL were in amazing condition considering the age but a wipe over with the 'matched' Gliptone dye and they look brand spanking new now, and it's a doddle to use.
Gliptone is the way to go for a colour change as well.
Good luck with the project.
The black leather seats in my WRX SL were in amazing condition considering the age but a wipe over with the 'matched' Gliptone dye and they look brand spanking new now, and it's a doddle to use.
Gliptone is the way to go for a colour change as well.
Good luck with the project.
No I didn't take as being mean pal. All help appreciated mate.
I would add all the belts & full cambelt kit, gearbox, diff oil and coolant,brake and power steering fluid to that too, fuel and air filters, after 7yrs standing I would change everything. 
Also tell hubby he needs to pre fill the oil filter and disconnect the crank sensor under the alternator, turn it over 4 x 15 seconds to build oil pressure before re-connecting the crank sensor and then and only then fire it up, other wise you might be needing a new engine after a few hundred miles, also only use top quality fully synthetic oil, and shell V power or tesco momentum super unleaded fuel. and don't be revving the **** off it while it's cold.
Also tell hubby he needs to pre fill the oil filter and disconnect the crank sensor under the alternator, turn it over 4 x 15 seconds to build oil pressure before re-connecting the crank sensor and then and only then fire it up, other wise you might be needing a new engine after a few hundred miles, also only use top quality fully synthetic oil, and shell V power or tesco momentum super unleaded fuel. and don't be revving the **** off it while it's cold.
Last edited by ditchmyster; Nov 14, 2014 at 03:57 PM.
I'd be inclined to Change the oil and filter. Remove the spark plugs and before you fit the new ones, Turn the engine over by hand with a spanner. It'll help to lubricate the bearings nice and slowly and you can check how it 'feels' before you fire it up.
As Ditchy said get all the belts changed.
As Ditchy said get all the belts changed.
I'd be inclined to Change the oil and filter. Remove the spark plugs and before you fit the new ones, Turn the engine over by hand with a spanner. It'll help to lubricate the bearings nice and slowly and you can check how it 'feels' before you fire it up.
As Ditchy said get all the belts changed.
As Ditchy said get all the belts changed.
I would add all the belts & full cambelt kit, gearbox, diff oil and coolant,brake and power steering fluid to that too, fuel and air filters, after 7yrs standing I would change everything. 
Also tell hubby he needs to pre fill the oil filter and disconnect the crank sensor under the alternator, turn it over 4 x 15 seconds to build oil pressure before re-connecting the crank sensor and then and only then fire it up, other wise you might be needing a new engine after a few hundred miles, also only use top quality fully synthetic oil, and shell V power or tesco momentum super unleaded fuel. and don't be revving the **** off it while it's cold.
Also tell hubby he needs to pre fill the oil filter and disconnect the crank sensor under the alternator, turn it over 4 x 15 seconds to build oil pressure before re-connecting the crank sensor and then and only then fire it up, other wise you might be needing a new engine after a few hundred miles, also only use top quality fully synthetic oil, and shell V power or tesco momentum super unleaded fuel. and don't be revving the **** off it while it's cold.
Yer everything gonna be changed pal. He knows about the turning engine etc as he's a zafira gsi turbo. But as stated before all help is appreciated .
.
Well ma girls engine being stripped down. She's started but knocking her head off and spoke to few people and all said lucky not bottom end it sounds like a shim so she's being stripped to see but boy what an *** getting cam belt cover off had to snap it. But also the cam belt bit loose so could be a tensioner loose. I will get this girl up and running proper if kills me .
The tank is fine the oil didn't have water in it . The fuel stunk a bit but part from knocking the car is running smooth . Our mates mate and other people said they surprised how good the car is even tho been stud for 8 years they can't believe it. Lol
O defo. Getting new cam belt kit next week as seems could be the tensioners that are knackered cam belt was slack . But like said car runs sweet no miss fire no smoke no other noises just the tapping. So shall see for defo. She's had new plugs and oil and stuff she just needs discs and pads and welding on the sill which won't cost us much beige a mate doing It











