Well ok, here's my weekend/track project
#301
Example photo of what I mean, although the car is on stands ATM to save my tyres from getting flat spots, when I put car down it still seems to look like positive camber slightly, will this relax once rolled/driven?
See the top mount for passenger side which is fully over towards inside of car to give neg camber.
See the top mount for passenger side which is fully over towards inside of car to give neg camber.
#305
Ok thanks, it's just I'm probably too used to the old suspension which had much less travel when up in the air and didn't get as much of a positive camber when mid air so hence putting less stress on the hub angle.
I'll try get a picture flat on ground but the way I've got the negative camber I'd of expect it to be a bit more obvious when in air and more so when on ground, but may just need driving to settle the tyre/hub stretch.
I'll try get a picture flat on ground but the way I've got the negative camber I'd of expect it to be a bit more obvious when in air and more so when on ground, but may just need driving to settle the tyre/hub stretch.
#308
Well i got to the bottom of my camber issue above, turns out the washer that comes with camber bolts, the lug was facing towards away from the car, ive now faced it towards the inner side and now create more camber.
So now i can see camber while car is still in air and more so when grounded, which is what I expected as I've set it to max neg camber at the rear and will tweek it when it goes for geom.
I knew there was something not right!
And before
You can see how the top part of wheel is now tucked in
So now i can see camber while car is still in air and more so when grounded, which is what I expected as I've set it to max neg camber at the rear and will tweek it when it goes for geom.
I knew there was something not right!
And before
You can see how the top part of wheel is now tucked in
Last edited by bustaMOVEs; 08 July 2017 at 08:26 PM.
#309
Well I've not updated this for quite a while now, I let the car sit over winter/xmas/new year.
But I'm hoping to get back to it ready for summer so hopefully no financial issues pop up, apart from the wife's just made me book an expensive holiday in July/august!
Anyway, This is what I've bought in meantime, (stocking fillers)
Rear firewall to cover the open rear as I have no back seats
A WRC timing belt tensioner (old style) which is more reliable for high power builds, I thought I'd better future proof myself
Just something I seen for sale pretty cheap so I bought it for a toy, will plug straight into my toucan, (I've seen the new plex screen for syvecs that I so want now )
And finally, bought another SC42, because I sold my old one with the intention to go bigger, but after a deep think I've changed my mind, again.
I loved how my car went before, was so rapid low down so would like it similar to that, later I may go bigger when I get bored.
I'm going to concentrate on my heads ATM and get them upto my spec and future proof them with Gucci parts........info soon to come
But I'm hoping to get back to it ready for summer so hopefully no financial issues pop up, apart from the wife's just made me book an expensive holiday in July/august!
Anyway, This is what I've bought in meantime, (stocking fillers)
Rear firewall to cover the open rear as I have no back seats
A WRC timing belt tensioner (old style) which is more reliable for high power builds, I thought I'd better future proof myself
Just something I seen for sale pretty cheap so I bought it for a toy, will plug straight into my toucan, (I've seen the new plex screen for syvecs that I so want now )
And finally, bought another SC42, because I sold my old one with the intention to go bigger, but after a deep think I've changed my mind, again.
I loved how my car went before, was so rapid low down so would like it similar to that, later I may go bigger when I get bored.
I'm going to concentrate on my heads ATM and get them upto my spec and future proof them with Gucci parts........info soon to come
#317
But may as well spend a decent amount on heads so I'm ready for whatever.
Thanks sj.
Last edited by bustaMOVEs; 10 January 2018 at 09:54 PM.
#318
Not updated in a while (I update more on my fb blog page if interested https://www.facebook.com/GC8v5R/)
But I've slowly starting collecting bits again and doing some prep work.
Had a dry day for once so been playing with angle grinder!
Before and after.
Thats prep done, (labour intensive but hopefully end result is worth it)
next is paint.
But I've slowly starting collecting bits again and doing some prep work.
Had a dry day for once so been playing with angle grinder!
Before and after.
Thats prep done, (labour intensive but hopefully end result is worth it)
next is paint.
#327
Scooby Regular
Although I don’t have a clue on this side of things...
it all looks pretty Gucci bro
Good luck with the build and hope you achieve what your after
it all looks pretty Gucci bro
Good luck with the build and hope you achieve what your after
#330
Couple of updates with the nice weather lately.
Managed a bit of prep again on cam covers and rocker covers ready for paint.
Also managed to get the final coat of wrinkle on cooling panel and inlet, so their done.
And alternator refurbished. (Thanks to dubzy for a couple of parts).
Managed a bit of prep again on cam covers and rocker covers ready for paint.
Also managed to get the final coat of wrinkle on cooling panel and inlet, so their done.
And alternator refurbished. (Thanks to dubzy for a couple of parts).