Lots of 500+ parts
22 October 2014, 07:58 PM
#151
Scooby Regular
Thread Starter
iTrader: (18)
Join Date: Jun 2006
Posts: 887
Likes: 0
Received 0 Likes
on
0 Posts
I'm not sure to be honest. Had a fair bit going on and a lot of parcels going out the moment.
All I know is that my wife sent it along with some other parts. Shes not here right now so I cant ask her...
All I know is what she told me, its sent via the postoffice.
I will cover the extra £2 - £4 of the shipping costs.
If your not happy all I can do is offer you a full refund including original shipping costs once you once you return it if it arrives too late for your needs.
Sorry
All I know is that my wife sent it along with some other parts. Shes not here right now so I cant ask her...
All I know is what she told me, its sent via the postoffice.
I will cover the extra £2 - £4 of the shipping costs.
If your not happy all I can do is offer you a full refund including original shipping costs once you once you return it if it arrives too late for your needs.
Sorry
22 October 2014, 08:42 PM
#153
Scooby Regular
iTrader: (2)
Join Date: Jun 2013
Location: Belgium (Bruges)
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
Nono.. Really no problem. But i was going to look how long sending would take to get here iff I knew when you've sended it.
Thx for everything, will let you know when its here
Sam
Thx for everything, will let you know when its here
Sam
22 October 2014, 09:01 PM
#156
Scooby Regular
Thread Starter
iTrader: (18)
Join Date: Jun 2006
Posts: 887
Likes: 0
Received 0 Likes
on
0 Posts
Still available at the moment. I'm going to give it another week and then it will be split as I have buyers for almost everything bar the 2.1 short block which I'm happy to keep for a while or I might even use it at some point (dont have a subaru at the moment but you never know) 
26 October 2014, 11:02 AM
#161
Scooby Regular
Thread Starter
iTrader: (18)
Join Date: Jun 2006
Posts: 887
Likes: 0
Received 0 Likes
on
0 Posts
Engine, 6-speed set-up, clutch, 2 bumpers (p1 white and rougher black one) and flat bootfloor left.
Most parts now gone, here is whats left....
OS Giken twin plate - £400 (needs push pull convertor) but plates are like new!! If I find the push pull converter it will be £450 including this.
6-speed full kit with new front seals and wheel bearings £1500
white bumper off track car, cut for FMIC with P1 splitter and air intake at drivers fog light £75
Black facelift bumper cut for FMIC £40
Flat boot floor from Arch £50
Engine options (Full spec on page 1)
Complete engine £4,600
2.1 block with all pumps, modine, pulleys and belt etc £3,100
2.1 block with no pumps, modine, pulleys and belt etc £2,700
The engine will remain complete for another week and then as soon as I have time it will be split as I have buyers for the heads, sump, studs, timing belt kit.
The 2.1 short block will then be available for £2,700 bare or £2,950 with the new modine, RCM water pump and RCM oil pump.
Most parts now gone, here is whats left....
OS Giken twin plate - £400 (needs push pull convertor) but plates are like new!! If I find the push pull converter it will be £450 including this.
6-speed full kit with new front seals and wheel bearings £1500
white bumper off track car, cut for FMIC with P1 splitter and air intake at drivers fog light £75
Black facelift bumper cut for FMIC £40
Flat boot floor from Arch £50
Engine options (Full spec on page 1)
Complete engine £4,600
2.1 block with all pumps, modine, pulleys and belt etc £3,100
2.1 block with no pumps, modine, pulleys and belt etc £2,700
The engine will remain complete for another week and then as soon as I have time it will be split as I have buyers for the heads, sump, studs, timing belt kit.
The 2.1 short block will then be available for £2,700 bare or £2,950 with the new modine, RCM water pump and RCM oil pump.
Last edited by duncatr; 26 October 2014 at 11:53 AM.
28 October 2014, 11:15 PM
#164
Scooby Regular
Thread Starter
iTrader: (18)
Join Date: Jun 2006
Posts: 887
Likes: 0
Received 0 Likes
on
0 Posts
I have one for a V3/4 STI. (Orangle label MAF)
Its not really universal though. The cone is flanged to a 4 bolt set-up so it mounts directly to the orange MAF.
Have a pic somewhere if it would help
Its not really universal though. The cone is flanged to a 4 bolt set-up so it mounts directly to the orange MAF.
Have a pic somewhere if it would help
31 October 2014, 12:03 PM
#165
Scooby Regular
Thread Starter
iTrader: (18)
Join Date: Jun 2006
Posts: 887
Likes: 0
Received 0 Likes
on
0 Posts
PM's replied to again.
Engine will be split when I get time next week unless I get a buyer for it complete before then.
Bunch of boxes in the car to take to postoffice at lunch time today.
Then 3 to sort out tonight for Saturday post, that should see everything up to date.
Engine will be split when I get time next week unless I get a buyer for it complete before then.
Bunch of boxes in the car to take to postoffice at lunch time today.
Then 3 to sort out tonight for Saturday post, that should see everything up to date.
02 November 2014, 07:53 PM
#166
Scooby Regular
Thread Starter
iTrader: (18)
Join Date: Jun 2006
Posts: 887
Likes: 0
Received 0 Likes
on
0 Posts
Main engine parts now sold. Will be split next week when I get a chance.
I'll be in touch with people once its done.
2.1 block with new pumps and modine - £2900 OR £2700 without pumps and modine
Heads - £1,200 (Owes me £1500+) Prov sold to Wuz
Sump - £300 (owes me £400, they are £600 new) Prov sold to Jamesmac
Timing belt kit £150 Prov sold to Chris Allsop
Studs - £200 (owes me £290 but cost £320 new) Prov sold to Marc.
I'll be in touch with people once its done.
2.1 block with new pumps and modine - £2900 OR £2700 without pumps and modine
Heads - £1,200 (Owes me £1500+) Prov sold to Wuz
Sump - £300 (owes me £400, they are £600 new) Prov sold to Jamesmac
Timing belt kit £150 Prov sold to Chris Allsop
Studs - £200 (owes me £290 but cost £320 new) Prov sold to Marc.
Last edited by duncatr; 03 November 2014 at 10:27 AM.
03 November 2014, 10:26 AM
#168
Scooby Regular
Thread Starter
iTrader: (18)
Join Date: Jun 2006
Posts: 887
Likes: 0
Received 0 Likes
on
0 Posts
Wuz - no problem. Got your PM earlier about them too.
Cosworth studs prov sold to Marc.
2.1 block back up for sale.....
Still splitting as I have buyers for all the parts and dont want to let them down.
Cosworth studs prov sold to Marc.
2.1 block back up for sale.....
Still splitting as I have buyers for all the parts and dont want to let them down.
05 November 2014, 10:02 AM
#169
Scooby Regular
Thread Starter
iTrader: (18)
Join Date: Jun 2006
Posts: 887
Likes: 0
Received 0 Likes
on
0 Posts
PM's replied to again.
Last few parts.... May take sensible offers on these.
OS Giken twin plate - £400 (needs push pull convertor) but plates are like new!! If I find the push pull converter it will be £450 including this.
6-speed full kit with new front seals and wheel bearings £1500
white bumper off track car, cut for FMIC with P1 splitter and air intake at drivers fog light £75
Black facelift bumper cut for FMIC £40
Flat boot floor from Arch £50
Engine options (Full spec on page 1)
2.1 block with new pumps and new modine £2,900
2.1 block with no pumps or modine £2,700
Last few parts.... May take sensible offers on these.
OS Giken twin plate - £400 (needs push pull convertor) but plates are like new!! If I find the push pull converter it will be £450 including this.
6-speed full kit with new front seals and wheel bearings £1500
white bumper off track car, cut for FMIC with P1 splitter and air intake at drivers fog light £75
Black facelift bumper cut for FMIC £40
Flat boot floor from Arch £50
Engine options (Full spec on page 1)
2.1 block with new pumps and new modine £2,900
2.1 block with no pumps or modine £2,700
11 November 2014, 12:50 PM
#174
Scooby Regular
Thread Starter
iTrader: (18)
Join Date: Jun 2006
Posts: 887
Likes: 0
Received 0 Likes
on
0 Posts
Not sure mate. I think £2,600 is pretty good for an unused 2.1
I know I paid a lot more than that for it.
I'm always open to offers but would need to be pretty close to that price.
Even if you do all the running around sourcing parts and organising the build its over £3k minimum!
(Probably not much change from £4k if you bought it all built "of the shelf")
I know I paid a lot more than that for it.
I'm always open to offers but would need to be pretty close to that price.
Even if you do all the running around sourcing parts and organising the build its over £3k minimum!
(Probably not much change from £4k if you bought it all built "of the shelf")
Last edited by duncatr; 11 November 2014 at 12:52 PM.
20 November 2014, 11:21 PM
#179
Scooby Regular
Thread Starter
iTrader: (18)
Join Date: Jun 2006
Posts: 887
Likes: 0
Received 0 Likes
on
0 Posts
List updated. Few bit gone. 6-speed linkage bush kit available again.
Here is whats left:-
Twin Plate OS Giken £400
AS Performance 6-speed linkage bush kit, new and unused £60
Flat bootfloor £40
Black Facelift bumper £40
Full AVCS timing belt covers £30
AVCS crank / trigger wheel £10
Orange MAF £50
Team Dynamic Pro race 1.2 in white. £325
17" x 8" ET50 5x114 so MY05 onwards STI
As new (tyres fitted and removed)
Here is whats left:-
Twin Plate OS Giken £400
AS Performance 6-speed linkage bush kit, new and unused £60
Flat bootfloor £40
Black Facelift bumper £40
Full AVCS timing belt covers £30
AVCS crank / trigger wheel £10
Orange MAF £50
Team Dynamic Pro race 1.2 in white. £325
17" x 8" ET50 5x114 so MY05 onwards STI
As new (tyres fitted and removed)
24 November 2014, 10:23 AM
#180
Scooby Regular
Thread Starter
iTrader: (18)
Join Date: Jun 2006
Posts: 887
Likes: 0
Received 0 Likes
on
0 Posts
List updated. Couple bits back up for grabs and a couple reduced in price....
Bare CDB £260
Twin Plate OS Giken £400
AS Performance 6-speed linkage bush kit, new and unused £55
Flat bootfloor £40
Black Facelift bumper £35
Full AVCS timing belt covers £30
AVCS crank / trigger wheel £10
Orange MAF £50
Team Dynamic Pro race 1.2 in white. £300
17" x 8" ET50 5x114 so MY05 onwards STI
As new (tyres fitted and removed)
These would cost between £600 and £700 new!
Bare CDB £260
Twin Plate OS Giken £400
AS Performance 6-speed linkage bush kit, new and unused £55
Flat bootfloor £40
Black Facelift bumper £35
Full AVCS timing belt covers £30
AVCS crank / trigger wheel £10
Orange MAF £50
Team Dynamic Pro race 1.2 in white. £300
17" x 8" ET50 5x114 so MY05 onwards STI
As new (tyres fitted and removed)
These would cost between £600 and £700 new!