Vaping - Electronic Cigarettes
#1983
I was going to buy the Ijoy Captain X3 kit that comes with the tank, just to have another tank and coils to try out really. Only problem is Fastech sell the tank but they don't sell any coils for it which is odd.
https://www.fasttech.com/products/0/...vw-apv-mod-kit
https://www.fasttech.com/products/0/...vw-apv-mod-kit
#1984
Scooby Regular
iTrader: (1)
I was going to buy the Ijoy Captain X3 kit that comes with the tank, just to have another tank and coils to try out really. Only problem is Fastech sell the tank but they don't sell any coils for it which is odd.
https://www.fasttech.com/products/0/...vw-apv-mod-kit
https://www.fasttech.com/products/0/...vw-apv-mod-kit
https://vapenology.co.uk/3x-ijoy-cap...lacement-coils
#1985
mmm yea that is strange, maybe because its relatively new? Not available on amazon either, but a quick google found this,
https://vapenology.co.uk/3x-ijoy-cap...lacement-coils
https://vapenology.co.uk/3x-ijoy-cap...lacement-coils
#1987
Scooby Senior
Thread Starter
I like that fat glass, 8ml would do me.
Both of my leak boxes are failing, I think I have one more chance by swapping the working coil holder from one to the one with the fully working micro usb socket. Charging off device is emergency only so that's out.
I fear change.
Both of my leak boxes are failing, I think I have one more chance by swapping the working coil holder from one to the one with the fully working micro usb socket. Charging off device is emergency only so that's out.
I fear change.
#1989
Scooby Regular
iTrader: (2)
Join Date: Apr 2004
Location: Somewhere in Kent, sniffing some V-Power
Posts: 15,029
Likes: 0
Received 0 Likes
on
0 Posts
Just made some pinkman juice after being on Heisenberg for over a year. Love the stuff. Made it with a ratio of 50/50 PG/VG too so a very nice throat hit.
#1992
Scooby Regular
Recommend me a good new sub ohm tank, flavour is the most important thing along with reliable coils. I'm currently using the big baby beast which is probably the best tank i've used to date with the X4 coils
I'm about to place an order on fasttech for some new X4 coils so while i'm at it i'll treat myself to a new tank so i've got a good spare, ideally recommend some good coils for it as well. Cheers
I'm about to place an order on fasttech for some new X4 coils so while i'm at it i'll treat myself to a new tank so i've got a good spare, ideally recommend some good coils for it as well. Cheers
#1993
Scooby Regular
iTrader: (1)
Recommend me a good new sub ohm tank, flavour is the most important thing along with reliable coils. I'm currently using the big baby beast which is probably the best tank i've used to date with the X4 coils
I'm about to place an order on fasttech for some new X4 coils so while i'm at it i'll treat myself to a new tank so i've got a good spare, ideally recommend some good coils for it as well. Cheers
I'm about to place an order on fasttech for some new X4 coils so while i'm at it i'll treat myself to a new tank so i've got a good spare, ideally recommend some good coils for it as well. Cheers
TFV12 prince gets good reviews (28mm). Coils are pricier and there isn't an X4, equivalent is the X6 (six coils)
Or just get another bbb in another colour as a backup?
#1994
Scooby Regular
I'll give that one a try, it seems to get good reviews for flavour and seems to get hardly any cons apart from not including an RBA which doesn't bother me.
Ignore that last bit, apparently they only do 0.16ohm coils for the Cleito 120 tank.
Ignore that last bit, apparently they only do 0.16ohm coils for the Cleito 120 tank.
Last edited by The Joshua Tree; 02 February 2018 at 02:29 PM.
#1995
Scooby Regular
iTrader: (1)
https://www.jacvapour.com/aspire-cleito-120-coils
#1996
Scooby Regular
If it was me I would get the BB X4 equivalent which is the 0.16ohm coils
https://www.jacvapour.com/aspire-cleito-120-coils
https://www.jacvapour.com/aspire-cleito-120-coils
https://www.fasttech.com/products/0/...ment-coil-head
#1997
Scooby Regular
iTrader: (1)
Are they the same as these as they are the only ones listed on Fasttech, they look the same in the pics
https://www.fasttech.com/products/0/...ment-coil-head
https://www.fasttech.com/products/0/...ment-coil-head
#1998
Scooby Regular
Nowhere can beat the price on the X4 coils from Fasttech, they are quite a lot cheaper, also the Aspire Cleito 120 tank is a lot cheaper from Fastech as well as the coils, the tank works out at 13.90 from them, over here your talking £23 - £25, the Cleito 120 colis from Fasttech work out at 10.30 for 5, on the link you posted they are 12.99 plus postage as you have to spend £40 on that site to get free postage and they don't sell the Aspire 120 tank yet they sell the coils.
#2000
Scooby Regular
This is odd.
I normally pay for my orders on Fasttech with Paypal, if you have any Aspire item in your basket you can't use paypal, it will only let you pay with Bitcoin, it gives you 2 options at the checkout, either paypal or bitcoin but the paypal option is greyed out.
Apparently you can't use paypal to buy Aspire items because paypal class them as tobacco items and you can't pay for tobacco items with paypal, i found that answer via google. Go and try it, put a mix of a few things in your basket and add some Aspire items, don't worry you won't be able to pay. It explains it below on the link
https://www.fasttech.com/forums/orde...ion-disabled/1
Now i've got a basket full of stuff i can't pay for lol
I normally pay for my orders on Fasttech with Paypal, if you have any Aspire item in your basket you can't use paypal, it will only let you pay with Bitcoin, it gives you 2 options at the checkout, either paypal or bitcoin but the paypal option is greyed out.
Apparently you can't use paypal to buy Aspire items because paypal class them as tobacco items and you can't pay for tobacco items with paypal, i found that answer via google. Go and try it, put a mix of a few things in your basket and add some Aspire items, don't worry you won't be able to pay. It explains it below on the link
https://www.fasttech.com/forums/orde...ion-disabled/1
Now i've got a basket full of stuff i can't pay for lol
Last edited by The Joshua Tree; 02 February 2018 at 05:35 PM.
#2003
FT will not let you pay for Aspire gear via PayPal the only work round is to buy other stuff
to the same value with PayPal
Then cancel the order and get F.T credit points / vouchers and use them to pay for the Aspire stuff
Bit of a faff i know but it does work.
to the same value with PayPal
Then cancel the order and get F.T credit points / vouchers and use them to pay for the Aspire stuff
Bit of a faff i know but it does work.
#2004
Scooby Regular
Because of the problems trying to buy Aspire stuff on Fasttech i've decided to go down another route, what's your opinions on this
https://www.fasttech.com/products/0/...er-216w-vw-apv
Mike Vapes has done a full review on it, he's well respected on youtube
He basically says that it's currently the best available for what it is on the market, it's a gentle way to get into semi building my own decks and squonking from what i believe will give you better flavour over a basic sub ohm setup.
https://www.fasttech.com/products/0/...er-216w-vw-apv
Mike Vapes has done a full review on it, he's well respected on youtube
He basically says that it's currently the best available for what it is on the market, it's a gentle way to get into semi building my own decks and squonking from what i believe will give you better flavour over a basic sub ohm setup.
#2005
Hmm the smaller capo squonk is total crap and fallen very flat on its ****.
If you fancy having a go at squoking your hard pushed to beat a cheap old pico squeeze
as a try me out sort of thing.
Ok it's not a v.w set up but it does have inbuilt safety cut off's so its sort of a mech but with
protection.
If you fancy having a go at squoking your hard pushed to beat a cheap old pico squeeze
as a try me out sort of thing.
Ok it's not a v.w set up but it does have inbuilt safety cut off's so its sort of a mech but with
protection.
#2006
Scooby Regular
iTrader: (1)
Because of the problems trying to buy Aspire stuff on Fasttech i've decided to go down another route, what's your opinions on this
He basically says that it's currently the best available for what it is on the market, it's a gentle way to get into semi building my own decks and squonking from what i believe will give you better flavour over a basic sub ohm setup.
He basically says that it's currently the best available for what it is on the market, it's a gentle way to get into semi building my own decks and squonking from what i believe will give you better flavour over a basic sub ohm setup.
Pico squeeze is ok but its only a single cell 18650 50W mod, so RDA build/coil choices are limited and less vapetime obviously than a dual cell mod. But yea they are cheap and seem to be very popular.
#2007
The only reason i suggest a squeeze is its cheap so if you find your not into
squonking you have not shelled out a great deal of cash.
As said above the coral RBA is a bit naff but pair it with say a wasp nano with a 0.5 build in it and you will have a nice small set up that will work well and pocket friendly to carry about.
https://vaping101.co.uk/products/oum...mm-with-bf-pin
squonking you have not shelled out a great deal of cash.
As said above the coral RBA is a bit naff but pair it with say a wasp nano with a 0.5 build in it and you will have a nice small set up that will work well and pocket friendly to carry about.
https://vaping101.co.uk/products/oum...mm-with-bf-pin
Last edited by b road blaster; 03 February 2018 at 04:35 PM.
#2008
Scooby Regular
What's the best wire and best gauge to use for making your own coils in an RDA , it will be used for squonking on an RDA deck.
I've seen various types of wire and various types of designs like Alien wire, chain wire, Kanthal A1 Nichrome, Kanthal, Nichrome, Ni80, Clapton etc etc
To start with i'm going to buy my own pre- made coils and buy the cotton etc, then once i'm up and running i'll buy one of those small tool kits and try and make my own coils.
Is a single coil better for squonking the a double, quite a few videos from what i've seen use the single coil setup on a squonker RDA.
Feel free to give us any advice.
I've seen various types of wire and various types of designs like Alien wire, chain wire, Kanthal A1 Nichrome, Kanthal, Nichrome, Ni80, Clapton etc etc
To start with i'm going to buy my own pre- made coils and buy the cotton etc, then once i'm up and running i'll buy one of those small tool kits and try and make my own coils.
Is a single coil better for squonking the a double, quite a few videos from what i've seen use the single coil setup on a squonker RDA.
Feel free to give us any advice.
#2009
Scooby Regular
iTrader: (1)
Personal preference, no wire is best, i would start with the easier wires until you are familiar with building, so the kanthal and/or Clapton. Alien/chain etc require a drill to make from scratch. Yea just buy them pre-made, that's what I do. I've built kanthal coils as they are easy (all you need is like you say a coilmaster kit or a 2.5-3mm drill bit) and some ohm's law knowledge, or use this site for calculating coil wraps etc.
http://www.steam-engine.org/coil.html
Single/dual coils or more, again, personal preference and depends on what RDA you are going to get. e.g. if you get an RDA with a large building area then dual coils would be better. Move flavor/smoother vape. Single coil would be more for a mouth to lung vaper.
http://www.steam-engine.org/coil.html
Single/dual coils or more, again, personal preference and depends on what RDA you are going to get. e.g. if you get an RDA with a large building area then dual coils would be better. Move flavor/smoother vape. Single coil would be more for a mouth to lung vaper.
Last edited by bioforger; 06 February 2018 at 03:25 PM.
#2010
Scooby Regular
What ohm to start with and what gauge ? From what i can gather 26 AWG seems to be a good starting point, i've no idea on what ohm to use tho in a RDA setup.