Notices
ScoobyNet General General Subaru Discussion

power increase advice!!

Thread Tools
 
Search this Thread
 
Old Sep 6, 2008 | 05:26 PM
  #1  
scooby46's Avatar
scooby46
Thread Starter
Scooby Regular
iTrader: (2)
 
Joined: Mar 2008
Posts: 733
Likes: 0
Lightbulb power increase advice!!

Hi all,

I have a my95 v2 sti. It currently has on it,

Uprated walbro fuel pump,
full decat exaust 2.5 inch,
HKS induction kit,
Front mount intercooler,
chipped n mapped to 1.1 bar boost
nkg 7's spark plugs

I want to take my scoob to 350 - 400bhp using just bolt on parts. I believe that the sti has forged pistons as standard and my engine has done 73,000miles and is well looked after so i wont be doing internals on it. unless it goes bang! ive got a few ideas but i need more advice, info where to get parts, peoples spec lists etc. . .

Cheers Leon
Reply
Old Sep 7, 2008 | 06:45 PM
  #2  
scooby46's Avatar
scooby46
Thread Starter
Scooby Regular
iTrader: (2)
 
Joined: Mar 2008
Posts: 733
Likes: 0
Default

can no one help??
Reply
Old Sep 7, 2008 | 06:49 PM
  #3  
g7prs's Avatar
g7prs
Scooby Regular
iTrader: (5)
 
Joined: Feb 2005
Posts: 5,197
Likes: 1
Default

If looking for 400 i would think you are going to need a bigger turbo, new injectors and some form of after market ecu ( apex, simtek ).
Reply
Old Sep 7, 2008 | 09:21 PM
  #4  
stevebt's Avatar
stevebt
Scooby Regular
iTrader: (8)
 
Joined: Sep 2002
Posts: 16,732
Likes: 33
Default

I would go 18g turbo with 550cc injectors and as above for the ECU. You will be right on the limit of your gearbox though
Reply
Old Sep 7, 2008 | 09:47 PM
  #5  
scooby46's Avatar
scooby46
Thread Starter
Scooby Regular
iTrader: (2)
 
Joined: Mar 2008
Posts: 733
Likes: 0
Default

ive got some 550cc injectors lined up at mo, and whats the difference between a tdo5 18g and a tdo5 20g? If i knew then id know which one to go for.
cheers
leon
Reply
Old Sep 7, 2008 | 09:58 PM
  #6  
stevebt's Avatar
stevebt
Scooby Regular
iTrader: (8)
 
Joined: Sep 2002
Posts: 16,732
Likes: 33
Default

18g you have more chance of keeping your gearbox and it has a little less lag
Reply
Old Sep 7, 2008 | 10:18 PM
  #7  
Marx Mcrae's Avatar
Marx Mcrae
Scooby Regular
iTrader: (4)
 
Joined: May 2003
Posts: 2,567
Likes: 0
From: Doncaster, UK
Default

for 400bhp you'' prob need to replace the 2.5 inch bore exhaust for a 3 inch

Basically a TD05 18g, 3 inch decat exhaust, ported headers and uppipe, boost controller, aftermarket ECU + remap, oil cooler.

Thats the basics that should get you to 360-370 bhp, above that and you'll need a TD05/6 20g.
Reply
Old Sep 8, 2008 | 04:57 PM
  #8  
scooby46's Avatar
scooby46
Thread Starter
Scooby Regular
iTrader: (2)
 
Joined: Mar 2008
Posts: 733
Likes: 0
Default

can anyone point me in the right direction for parts on the 350 - 400bhp build. cheers guys
Reply
Old Sep 8, 2008 | 05:00 PM
  #9  
53's Avatar
53
Scooby Senior
iTrader: (41)
 
Joined: Dec 2005
Posts: 16,742
Likes: 4
From: Standing Up
Default

I would start with a properly mapped ECU, or does 'chipped' refer to the ESL piggyback ?
Reply
Old Sep 8, 2008 | 05:04 PM
  #10  
g7prs's Avatar
g7prs
Scooby Regular
iTrader: (5)
 
Joined: Feb 2005
Posts: 5,197
Likes: 1
Default

It depends what you are looking to pay ! Are you looking for new stuff or second hand? Keep an eye on the for sale section on here for turbos and and ecu's. If you are looking for new stuff then it depend what area you are from.

AndyForrestPerformance

Andy does part exchange on turbos and also supplies fits and maps the ecu's.
Reply
Old Sep 10, 2008 | 07:11 AM
  #11  
scooby46's Avatar
scooby46
Thread Starter
Scooby Regular
iTrader: (2)
 
Joined: Mar 2008
Posts: 733
Likes: 0
Default

Originally Posted by 53WRX
I would start with a properly mapped ECU, or does 'chipped' refer to the ESL piggyback ?
hmm im not realy sure, he inserts a chip into a slot into the ecu and does something with his laptop. thee guy knows his stuff he increases the boost and other parimeters i think.
Reply
Old Sep 25, 2008 | 06:14 PM
  #12  
scooby46's Avatar
scooby46
Thread Starter
Scooby Regular
iTrader: (2)
 
Joined: Mar 2008
Posts: 733
Likes: 0
Default

What the difference between 18g and 20g? what is the max bhp from them?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JimBowen
ICE
5
Jul 2, 2023 01:54 PM
just me
Non Scooby Related
26
Jan 3, 2020 11:12 AM
scoobhunter722
ScoobyNet General
52
Oct 20, 2015 04:32 PM
Davalar
General Technical
19
Sep 30, 2015 08:54 PM
jobegold@hotmail.co.uk
ScoobyNet General
2
Sep 27, 2015 09:44 PM




All times are GMT +1. The time now is 12:15 PM.