Does anyone make an analogue guage which shows both oil temperature and pressure in one fitting?
Thanks,
Martin.

The only dual gauges I know off are the SPA guages. Very good units, plus you can choose how you read the pressure and temps.

Dan

Cheers Dan,
I've seen these in Mike Tuckwood's car, and on Scoobymania's site, very nice but a tad on the expensive side. I'm looking at getting one of his twin pod A-pillar mounts, and would prefer an analogue one to match the boost gauge in the other space.
Martin.

http://secret.lab6.com/uploaded_files/1003155382.jpg

This and others like it are avaiable from

http://www.racebreed.com/sti03a.htm

simon

[Edited by PCB - 10/15/2001 3:25:10 PM]

Thanks Simon, I'll try that link again later, it isn't working right now.
Martin.

Martin try

www.racebreed.com

then got to the STI section, gauges are under 'electronics'

simon

edited because links don't seem to work???

[Edited by PCB - 10/15/2001 4:48:53 PM]

I have Mocal 52m.m. combined oil temp/pressure gauge and a boost gauge (white faced) mounted in the Subaru centre pod. The gauges were £52.75 and £21.23 (+vat) respectively from Burton Power.
Check out www.burtonpower.com
You will need to machine a sump plug to recieve the temp. sender. (did this myself - can supply drawing or machine a plug)
Cheers JohnD

I found this at: http://www.merlinmotorsport.co.uk

http://www.merlinmotorsport.co.uk/catalogue/racetech_pt1014b.jpg

£57.75+VAT+delivery

No connection with the company, just found it when search for a gauge

Andy

Thankyou gentlemen, I knew there were some out there somewhere :D.
Martin.

The only thing I don't like about that gauge is that it is mechanical so you'd need to have piping with hot oil in coming into cabin! :( They don't seem to do any electrical gauges like this otherwise I'd have been interested.