Notices
Wheels, Tyres & Brakes

Tyre pressures?

Thread Tools
 
Search this Thread
 
Old Oct 23, 2003 | 10:15 AM
  #1  
Iain Young's Avatar
Iain Young
Thread Starter
Scooby Regular
 
Joined: Sep 1999
Posts: 6,956
Likes: 0
From: Swindon, Wiltshire Xbox Gamertag: Gutgouger
Cool

I've just had some new 225/45/17 Bridgestone SO3s fitted and was wondering what I should set the tyre pressures to. I've got them set as mentioned in the handbook (33 at the front and 28 at the back), but was wondering if the rear really ought to be a bit higher?

Thanks,
Iain
Reply
Old Oct 24, 2003 | 09:22 AM
  #2  
Iain Young's Avatar
Iain Young
Thread Starter
Scooby Regular
 
Joined: Sep 1999
Posts: 6,956
Likes: 0
From: Swindon, Wiltshire Xbox Gamertag: Gutgouger
Question

Anyone? I need to know today as I drive down to Cornwall early tomorrow morning...

Thanks,
Iain
Reply
Old Oct 24, 2003 | 12:01 PM
  #3  
MARK MORRIS's Avatar
MARK MORRIS
Scooby Regular
 
Joined: Sep 2000
Posts: 1,800
Likes: 0
Smile

i run 34 f , 32 r on mine
mark
Reply
Old Oct 27, 2003 | 02:44 PM
  #4  
Lars's Avatar
Lars
Scooby Regular
 
Joined: May 1999
Posts: 171
Likes: 0
Question

Tyre pressure is depending on your car set up. Bump steering or not, Whell allignment standard or not, Spring/dampers and your driving style, how do you want your car to behave ?
General rule for street tyres is, more pressure = more grip but take care not to exceed the max pressure ( measured hot) listed on the sidewall of the tyre. The standard pressure listed in your user guide is a good start, I recommend to add + 3-4 PSI front and rear and then adjust the rear to you find the ballance you need.
With bump steer adjustment and a rear adjustable ARB I now run same pressure front and back 2,5 bar around 37 PSI
As you see there is no answer to you question, it's up to you driving style.
Reply
Old Oct 27, 2003 | 04:08 PM
  #5  
mwp's Avatar
mwp
Scooby Regular
 
Joined: Mar 2003
Posts: 1,084
Likes: 0
From: cambs
Post

34/32
Reply
Old Nov 1, 2003 | 05:48 PM
  #6  
Iain Young's Avatar
Iain Young
Thread Starter
Scooby Regular
 
Joined: Sep 1999
Posts: 6,956
Likes: 0
From: Swindon, Wiltshire Xbox Gamertag: Gutgouger
Post

Thanks
Reply
Old Nov 2, 2003 | 06:44 PM
  #7  
scoobymy01's Avatar
scoobymy01
Scooby Regular
 
Joined: Oct 2003
Posts: 353
Likes: 0
From: Scotland
Post

dont go mad on the pressure mate , i bought i set of wheels from a guy and wanted to test run them B4 i handed over the ££££ ..holey shi* was like i was driving on an ice rink ....all over the place so went to garage while out testing ...Front 50 PSI back 54 PSI ....mad mate think just the very centres of the tyres were gripping at thet ...lol

take care

mikey
Reply
Old Nov 2, 2003 | 11:44 PM
  #8  
Iain Young's Avatar
Iain Young
Thread Starter
Scooby Regular
 
Joined: Sep 1999
Posts: 6,956
Likes: 0
From: Swindon, Wiltshire Xbox Gamertag: Gutgouger
Post

Blimey, I wasn't thinking of doing anything so drastic, (probably 32/34).

Thanks anyway...
Reply
Old Nov 3, 2003 | 01:36 PM
  #9  
JIM THEO's Avatar
JIM THEO
Scooby Regular
 
Joined: Oct 2001
Posts: 1,833
Likes: 0
Post

What about 36/33?
JIM
Reply
Old Nov 3, 2003 | 01:40 PM
  #10  
PhilA's Avatar
PhilA
Scooby Regular
 
Joined: Jan 2003
Posts: 952
Likes: 0
From: P1 0790, Durham TTS
Post

just try some presures and adjust them slightly till your happy. I'm running 34 front and 32 rear this week.
Reply
Old Nov 3, 2003 | 02:09 PM
  #11  
Gridlock Mikey's Avatar
Gridlock Mikey
Scooby Regular
 
Joined: Jan 2001
Posts: 15,233
Likes: 0
From: http://www.facebook.com
Post

I've found that not only does grip level and balance of the car change quite significantly, but also the wear rate. My car gets used every day and I cover about 2k miles per month. I quickly realised that "Designer" tyres like the Toyo's etc were just too soft a compound and as such I was replacing them every 3-4 months due to wear or because of punctures £1500 a year on tyres was not funny
With the Toyo's Goodyears, etc I found that running them at 36/34 would get me an extra months worth of use, but I found that the outside edges on the fronts would go first followed by the inside and if I really pushed my luck, i'd get down to the wear indicators
I now run BG Goodrich Profiler G's. Not the worlds most awe inspiring tyre, but VERY hard wearing. I'm looking at just needing to change mine now (Fronts anyway) after nearly 15k and a track day, the rears are still going strong
As the tyres are harder, they seem to respond best to lower pressures that promote even wear. I run these at 34 all round. 32 in the rears when 4 up seems to make the car feel like it's got flat tyres
So in summary, If it's a second car, get yaself some "designer" tyres, they work well, and will last you a year or so. If you use the car daily and are not hoofing around like a loon everywhere, then get something that will last. Most of us have nowhere near the skills, nor the space to drive on the ragged edge all day everyday, wearing our tyres out, so why spend £400+ on summat that can be had for £300

Just my ikkle bit of input

Mikey
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KAS35RSTI
Subaru
27
Nov 4, 2021 07:12 PM
Billet
ScoobyNet General
42
Oct 14, 2015 10:38 PM
FuZzBoM
Wheels, Tyres & Brakes
16
Oct 4, 2015 09:49 PM
Ganz1983
Subaru
5
Oct 2, 2015 09:22 AM
shorty87
Wheels And Tyres For Sale
0
Sep 29, 2015 02:18 PM




All times are GMT +1. The time now is 11:46 PM.