Hi all untill recently i didnt realise my MY00 was fitted with a quickshift kit, (ggr by the look of it), the gearlever connects to another rod which disapears thru the bulfk head, its this secon rod which appears to catch or skim the meatal surround bolted to the transmission tunnel, is this the norm or is there a fix?

Cheers

 

Yes, with the quick shifts you have to bend back the surround slightly so that (when engaged in first) the con rod does not catch. Pair of pliers and some gentle brute force

This is standard for all people that have fitted short shifters

Cheers
Paul

 

Thx Paul, the rattle was doing my head in!!!, so a little bend will sort it...

Cheers
Fergal

 

Con Rod catching gear lever... Id be really worried

David

 

Are you sure that that is the cause of rattle. I had an annoying rattle which I eventually traced to the bush at the connection of the shift rod to the shift lever.

Cured it by packing with copper grease

 

cheers all, i removed the metal plate and whacked it (gently lol) seems to have cured it... hi ya stratman, im fairly sure it was the cause there was a scrape on the the shaft where it made contact with the plate... it was buggin the hell outta me though

thx
Fergal

 

Mine only started rattling like that a couple of weeks after fitting the Q/S, so didn't immediately link the events. It was a rather annoying (and worrying) noise!

I Dremmelled my metal surround - you should have seen the sparks!!

Ratman
MY98 Wagon