What offset ?
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Jun 2012
Location: Aylesbury
Posts: 559
Likes: 0
Received 0 Likes
on
0 Posts
What offset ?
hi all I am looking at a set of xxr 527's in 18X8.75 but I am unsure of what offset to go for . Either et35 or et20
I have an 01 bug wagon ( lowered 30mm ) but it will have the saloon wings fitted on the front. Will I get away with the et20 under those arches while getting then rear arches rolled?
Im after the et20 fitment because i am of the understanding that it has a more aggressive concave face than the et35. However if this is not the case and they are the same I will go for the et35 to make life a little easier.
Any info or help would be great
Thanks guys
Dan
I have an 01 bug wagon ( lowered 30mm ) but it will have the saloon wings fitted on the front. Will I get away with the et20 under those arches while getting then rear arches rolled?
Im after the et20 fitment because i am of the understanding that it has a more aggressive concave face than the et35. However if this is not the case and they are the same I will go for the et35 to make life a little easier.
Any info or help would be great
Thanks guys
Dan
#2
Scooby Regular
iTrader: (7)
Hi Dan
Not sure,but you will need Coilovers and camber bolts,we are running only 9JX17" ET28 and we are must raised at rear suspension due on hard cornering they're rub
But still at rear wheels will stick out more like at front,just due at rear you have narrow arches
Have look on this thread
https://www.scoobynet.com/members-ga...rches-lol.html
Jura
Not sure,but you will need Coilovers and camber bolts,we are running only 9JX17" ET28 and we are must raised at rear suspension due on hard cornering they're rub
But still at rear wheels will stick out more like at front,just due at rear you have narrow arches
Have look on this thread
https://www.scoobynet.com/members-ga...rches-lol.html
Jura
Thread
Thread Starter
Forum
Replies
Last Post
ossett2k2
Engine Management and ECU Remapping
15
23 September 2015 09:11 AM