fitted some new front calipers brembos off a Sti first problem the old caliper bolts were a different thread overcame that problem.Went to put the wheels back on....they wont fit !! The wheels are Oz 18" ultraleggeras.How can i get round this?When i bought these i was assured they would be a straight swap,they were not.

 

where is Mr Godney when you need him?

 

Might have the wrong offset wheels?

Longer studs and spacers or ditch the wheels and get something nice

 

Most of the classic wheel will not fit over the STi Brembo's , they dont fit under the P1 17" and 18" wheels , whoever told you they would fit has told you porkies !

If you have room in the arch , the only way you will fit them is with wheel spacers

 

5mm spacers + spigot rings problem solved.A big difference from the wrx standard four pots.Cost a few quid to get sorted but worth it in the end.

 

https://www.scoobynet.com/wheels-and...5x100-pcd.html

First post clearly states that spacers were needed.

Sorry !

dunx

 

DUMB COMPUTER !

 

i am not on about the MINT wheels i bought but some brembo sti calipers i bought.Its all sorted now.