abs ring
06 February 2011, 08:25 AM
#1
Scooby Regular
Thread Starter
Join Date: Aug 2010
Location: Stoke on Trent
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
abs ring
Fitted new discs and pads to my wrx bugeye yesterday. However my off side rear disc was seized up and upon getting it off I managed to break my abs ring. Anyone if where I can get a replacement cheaply
Last edited by acemodder; 06 February 2011 at 08:32 AM.
06 February 2011, 03:16 PM
#2
Scooby Regular
iTrader: (1)
Join Date: Jun 2000
Location: Essex
Posts: 2,818
Likes: 0
Received 0 Likes
on
0 Posts
This a common problem on Smart cars, they rust as they are very exposed. A common fix is to araldite them back in place, you just need to make sure the spacing between the slots is correct.
I had to replace mine (Smart), and opted for new rings which I had to heat up to fit onto the drive shaft. I don't know if you can buy separate rings for the Scoob.
I had to replace mine (Smart), and opted for new rings which I had to heat up to fit onto the drive shaft. I don't know if you can buy separate rings for the Scoob.
06 February 2011, 05:59 PM
#4
Scooby Regular
iTrader: (1)
Join Date: Jun 2000
Location: Essex
Posts: 2,818
Likes: 0
Received 0 Likes
on
0 Posts
Sounds too cheap for good quality, I paid £50 a pair for mine.
I actually removed the drive shaft, makes the job a little easier. Give them a good coat of Hammerite after fitting and they'll last a lot longer.
Some fitting instructions here
I actually removed the drive shaft, makes the job a little easier. Give them a good coat of Hammerite after fitting and they'll last a lot longer.
Some fitting instructions here
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM