Hi,

I'm about to order a set of 18" Team Dynamic Pro Race 1.2 alloy wheels and was wondering if anyone can confirm if the following would fit my JDM STi Bug Eye 2001 (brembos)



Stud Diameter:5X100
Rim Width:8J
Rim Diameter:18"
Offset:45
Number of Studs:5
Tyres 225/40/18

Thanks in advance
Neil

 

should fit fine mate

 

I was offered these in 17s to clear Brembos so 18`s should clear.

 

yes i had a set myself and the cleared 8 pots no problem .

 

Spoke shape is the deciding factor, mine are OZ's and ET 45, on an 8" rim, so it's likely to be fine !

IMHO

dunx

 

I have a set and they fit STi with no prob. One thing is they may just catch rear wheel arches (tyre dependant) if car is lowered as ET45 moves the wheel out by 8mm from standard. I removed the rubber strip around the rear arch and it now just misses.

Make sure you get new large cone wheel nuts as these wheels do not have steel inserts and the skinny OE nuts can rip through.

 

Hey Guys, I want to put the same set of wheels on a 1998 GC8 import WRX (non Brembo), will there be any clearance issues, Team Dynamics say that they won't fit in the 8 inch width?!?!? i'll be fitting coilovers soon too, any foreseable problems. Any help appreciated

Swerve