Notices
Wheels, Tyres & Brakes

Godspeed 335mm problems

Thread Tools
 
Search this Thread
 
Old Sep 22, 2009 | 07:43 PM
  #1  
turbotimmy's Avatar
turbotimmy
Thread Starter
Scooby Regular
 
Joined: Oct 2006
Posts: 100
Likes: 0
Default Godspeed 335mm problems

Has anyone had problems with the 335mm Godspeed kit? Mine appears to have a mild vibration/ hum under high speed braking and squeals at low speeds. Also there is a 2mm lip on the pad where it doesn't make contact with the discs outer edge. I have e mailed Godspeed but have had no reply
Reply
Old Sep 22, 2009 | 08:00 PM
  #2  
IainMilford's Avatar
IainMilford
Scooby Regular
15 Year Member
Liked
Loved
Community Favorite
iTrader: (15)
 
Joined: Jun 2008
Posts: 3,927
Likes: 91
From: In the garage
Default

Hi Tim, I have not long fitted this kit and also experienced the same symptoms you have, after asking around I found that the squeaking is a trademark of the ferodo pads and nothing to worry about. I presume the hum/drone noise you get is when you're braking from 100+ (on a track of course ) I also experienced this at a couple of recent track days and was later told this is common with grooved discs. As for the lip on the pads that will happen, the pads are not a subaru fitment but modified jaguar / aston martin pads. These pads are the same length but wider than the standard wrx pads to get the extra disc coverage due to using the standard calipers.

The first time I heard the drone noise I thought they were faulty but am quite happy with them now, they are'nt going to be a replacement for AP 6 pots but are better than the standard brakes IMO

Hope this helps
Iain
Reply
Old Sep 24, 2009 | 07:19 PM
  #3  
turbotimmy's Avatar
turbotimmy
Thread Starter
Scooby Regular
 
Joined: Oct 2006
Posts: 100
Likes: 0
Default

Cheers for that. The vibration can occur from anything above 60 mph to be honest. Oh well as long as it stops
Reply
Old Sep 24, 2009 | 07:43 PM
  #4  
Godspeed Brakes's Avatar
Godspeed Brakes
THE braking specialist
25 Year Member
Liked
iTrader: (259)
 
Joined: Dec 2000
Posts: 8,021
Likes: 57
From: www.godspeedbrakes.co.uk
Default

Hi
What you fitted them did you clean off the rust on the hub so the disc sits perfectly ? and were all the pistons free and not sticky at all , these two items can give problems your experiencing.

You can get a slight humming noise with grooved discs and performance pads as mentioned about , go out and give them a hiding to see if it's pad deposits , if it is it should clear up , if not they are covered under our 12 month guarantee

You email got caught up in my spam filter sorry , if you want to speak to me ring me on 01656 723060

Hope this helps
Ian
Reply
Old Sep 25, 2009 | 12:35 PM
  #5  
IainMilford's Avatar
IainMilford
Scooby Regular
15 Year Member
Liked
Loved
Community Favorite
iTrader: (15)
 
Joined: Jun 2008
Posts: 3,927
Likes: 91
From: In the garage
Default

as ever a good / helpful response from Ian
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Abx
Subaru
22
Jan 9, 2016 05:42 PM
PetrolHeadKid
Driving Dynamics
10
Oct 5, 2015 05:19 PM
T.K
General Technical
10
Oct 2, 2015 11:35 AM
the shreksta
Other Marques
26
Oct 1, 2015 02:30 PM
Zuber
Wheels, Tyres & Brakes
3
Sep 28, 2015 12:08 AM




All times are GMT +1. The time now is 05:07 AM.