hi i have a set of brembos with 330mm front discs and 310mm rear with 114 pcd what is needed to fit them to a 01 p1

 

Front's will fit on fine, you jus tneed to check wheel clearance. As for the rears, I am not sure with P1's but when I was researching the fit for my car I was told I needed a fitting kit for the rears (High Performance Brakes - Supplying AP and Brembo brake kits for road and motorsport use)

 

Will the discs not need drilled to the correct PCD for the car ?

 

Yes the discs will need redrilling to a 5 x 100 pcd , the fronts will then bolt straight on , but the rears need the fitting kit and handbrake shoes kit we make
Cheers Ian

 

Are these the Gold or Black Brembos? The gold should be 326 front and 316 rear but I think the black are different 330 front and 310 rear. If they are the black then the rears have different mounts than the gold and you'll need a kit from Godspeed to suit but from what Godspeed has said is that you will only be able to use the 290 Newage wrx rear disc with the black calipers.

 

I have gold Brembo's on my P1, brackets needed on the rear as Ian said.