Anyone running these discs with STI Brembos?
Any feedback?
Cheers

 

Even if people aren't, Ian's discs hold up very well to abuse. My 335mm Kit with the 32mm wide discs and separate bells have been superb over the last 3years+. Ian also supplies the discs to use with AP callipers so they should be ok with the OE Brembo from the later STI's.

Wayne.

 

Does Ian supply the Powervane rotors ?

 

No I dont

 

The STi 2 piece discs , the 335mm discs for the Subaru 4 pots , and our 330mm replacements for kits with AP discs are all my own make , and all come with a 12 month anti warp guarantee even when used for track days , the only discs I believe that do
Cheers Ian

 

No worries I was after some thats all.

 

i bought these for my car couple of months back with ferrodo 2500 pad
front/rear well worth it awesome stoppers!!

 

How much for the 2 piece discs?

 

The 2 piece STi 2 piece grooved discs are £350 a pair , from there on replacement discs are £275 a pair as you re-use the bells.
Cheers Ian

 

Why does the two piece work better than an all in one? I need new disks soon.

 

Hi
The discs are lighter so less unsprung weight , as the bells are aluminium they dissapate heat quicker so you get less heat transfer through to the hubs and bearings , the main advantage thought is as the discs heat up and cool down , they can move very slightly on the bells as they expand and contract , so much less chance of them warping.
Cheers Ian

 

Thanks Ian thats interesting, so I see why these would be beneficial for track. Might be slight overkill for my road use. How much are a pair of good quality one piece disks for the Brembos?

 

I can supply you our one piece grooved discs for £175 a pair plus £10 P&P , Got these also on the shelf
Cheers Ian

 

...

 

I personally think this a bit rude on a thread asking about Ian's products.

And yes, I am a die hard Godspeed fan.

Wayne.

 

You're right