Help with rear brake pads.
#1
Scooby Regular
Thread Starter
Join Date: May 2005
Location: Avoiding tractors and OAP's!!!
Posts: 1,282
Likes: 0
Received 0 Likes
on
0 Posts
Help with rear brake pads.
I've got a UK 2002 Impreza WRX with standard brakes, which needs the rear brake pads replacing. I've took my wheel off and removed the spring clip, 2 pins and the 2nd large clip, but what happens next? Any advice would be great on changing the rear brake pads.
Thanks, Wolfie.
Thanks, Wolfie.
#2
If you remove the pins , push the pistons back into the calipers , do this with a screw driver fitted between the disc and pad and lever them back in , it doesnt matter if the pads chip as there going in the bin , the pads will just pull out , give it all a good clean to get rid of all the old brake dust , fit the new pads in , refit the springs and pins , pump the pedal to get the pistons back out so everything is back into there working position , stand back and admire
Thread
Thread Starter
Forum
Replies
Last Post
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM