New OZ wheel in Scooby Spec
#1
I have just been to Autosport show and spoke to OZ's importer who has just taken delivery of the following in ET48 offset suitable for Subaru. approx cost £155 each.
#5
16" 17" and 18"
As for the offset it seems anywhere from 45 to 52 appears to be offered for Scooby's. I would think the nearer 52 you can get the better but most seem to be around 48 to 50.
I will be getting some as soon a funds allow and will post up some Pic's
As for the offset it seems anywhere from 45 to 52 appears to be offered for Scooby's. I would think the nearer 52 you can get the better but most seem to be around 48 to 50.
I will be getting some as soon a funds allow and will post up some Pic's
Trending Topics
#9
I have just spoken to Motorsport Wheels the importers and they have stock 7"x17", will be getting 18" soon. Nobody has ordered a set of either size yet. As for prices my local tyre place in Rochford has quoted £820+vat with 215/40x17 GoodYear F1 and £936+vat with 215/40x17 S02-PP. Also the only colour is Titanium (no gold etc )
#11
An important "detail" about this new wheel (17") is the weight: it is just between 7 - 7,5 kg; that makes it 2 kg less than f.e. the P1-17" wheel, and more than 2kg compared with most other wheels.
grt Geert
grt Geert
#12
I have actually managed to find a dealler with one of these wheels on display, and yes they are light. I compared it with a Super T and the difference is really noticable. Still trying to get the best deal but will post pic when I get them done hopefully in next few weeks.
#15
TopCat
Its a new shop in West Street, Southend on Sea, Can't remember the name the phone number is 01702 333335. Guy's name is Nick (I think, tell him you spoke to me)
The deal was £800+vat for 7x17 with Toyo's 215/40x17. He could not do SO2-PP. This is about £100 quid cheaper than any other quote I managed to get.
Its a new shop in West Street, Southend on Sea, Can't remember the name the phone number is 01702 333335. Guy's name is Nick (I think, tell him you spoke to me)
The deal was £800+vat for 7x17 with Toyo's 215/40x17. He could not do SO2-PP. This is about £100 quid cheaper than any other quote I managed to get.
#17
Sorry, it's still too early so here's a dumb question.
What's the correct offset for 17" on a MY00, and where can I get these from in the North?
Cheers,
Nick (requiring hand holding this morning)
What's the correct offset for 17" on a MY00, and where can I get these from in the North?
Cheers,
Nick (requiring hand holding this morning)
#19
I just picked up a set from Bath Road Tyres in Slough. ( part of PROtyre I think )
The price for a set of 4 fitted with 215/40 S02PP's was £1128 inc VAT. (£980 ex VAT)
They are currently ex stock at Oz, I ordered them yesterday and had them fitted today. First time I've used this company and they appeared pretty professional.
They can be contacted on 01753 571171 ask for Steve Evans or email on sales@bathroadtyres.co.uk
They look pretty good on a "cool grey" scoob
The price for a set of 4 fitted with 215/40 S02PP's was £1128 inc VAT. (£980 ex VAT)
They are currently ex stock at Oz, I ordered them yesterday and had them fitted today. First time I've used this company and they appeared pretty professional.
They can be contacted on 01753 571171 ask for Steve Evans or email on sales@bathroadtyres.co.uk
They look pretty good on a "cool grey" scoob
#20
Ian ( Maxy-uk)
I'm picking up a set on sat am from Transcal in Livingston ( presumably you're familiar with them ?)Total cost all in 995 , Toyo t1-s and balanced.Not seem them yet - only the picture above.Hopefully look cool though on my silver MY99 ??
If you want to see them on my car ( you have silver MY00, yes ? give me a shout. Might even be able to make it to Maccie D's on Sun morn' - I live in Sth Q.
CHEERS
Ritchie
I'm picking up a set on sat am from Transcal in Livingston ( presumably you're familiar with them ?)Total cost all in 995 , Toyo t1-s and balanced.Not seem them yet - only the picture above.Hopefully look cool though on my silver MY99 ??
If you want to see them on my car ( you have silver MY00, yes ? give me a shout. Might even be able to make it to Maccie D's on Sun morn' - I live in Sth Q.
CHEERS
Ritchie
#23
Guys
If you do get the 18" wheels, only fit Pirelli P-Zero's to them.
Apparently, these are the only 18" tyres available which will clear the wheel arches.
225/35ZR18 is the size fitted to the P1 18" wheels.
Regards
Kurt
If you do get the 18" wheels, only fit Pirelli P-Zero's to them.
Apparently, these are the only 18" tyres available which will clear the wheel arches.
225/35ZR18 is the size fitted to the P1 18" wheels.
Regards
Kurt
#24
Hey Ritchie
It was your wheel i picked up
Good job on the haggling down...he quoted me the same price
Yea i have a silver my00. Hopefully see you at McDonalds on Sunday...let me see them on the car....must look f***ing awesome...would look better on my car
Ian
It was your wheel i picked up
Good job on the haggling down...he quoted me the same price
Yea i have a silver my00. Hopefully see you at McDonalds on Sunday...let me see them on the car....must look f***ing awesome...would look better on my car
Ian
#25
Guys
the wheels are now on my car ...and looking VERY good indeed.Either I'm going paranoid or a lot more people are paying attention to my car !They look great with my brake calipers which are painted silver with Hammerite paint.
As Ian said above the wheels are Very light indeed. Before they were put on the car I held a "normal" 17 inch alloy in on hand and the Superleggera in the other and it was almost half the weight !
Transcal seem like a good outfit to deal with if you're North of the border ( no connection with them by the way)and I think I genuinely got a fair deal.
Don't own a digital camera but will see if I can get a picture scanned if poss.
cheers guys.....go buy some !
ps Ian ...will try and make it sunday am...if not you can have a look some other time ?
the wheels are now on my car ...and looking VERY good indeed.Either I'm going paranoid or a lot more people are paying attention to my car !They look great with my brake calipers which are painted silver with Hammerite paint.
As Ian said above the wheels are Very light indeed. Before they were put on the car I held a "normal" 17 inch alloy in on hand and the Superleggera in the other and it was almost half the weight !
Transcal seem like a good outfit to deal with if you're North of the border ( no connection with them by the way)and I think I genuinely got a fair deal.
Don't own a digital camera but will see if I can get a picture scanned if poss.
cheers guys.....go buy some !
ps Ian ...will try and make it sunday am...if not you can have a look some other time ?
#26
Just ordered myself a set should be here Tuesday, £800+vat with 215/40 x 17 Toyo's from Pure CARma on Southend (01702 333335) Wiil post some pic's when I can borrow the digital camera from work.
#27
Andy,
Thanks for the Info on where and how much, I spoke to Chris at the store today, he is just checking on when they can deliver to me, before I place my order.
GUYS tell me something will these look ok on a Black SCOOBY?????????
TC
Thanks for the Info on where and how much, I spoke to Chris at the store today, he is just checking on when they can deliver to me, before I place my order.
GUYS tell me something will these look ok on a Black SCOOBY?????????
TC
#28
Andy,
You are looking at a proud owner of the new OZ's the will be with me on Wed.
A word of advice on the pic it shows a metal valve and cap (only silver) the wheels & tyres come staight from the suppliers to the store in Essex, ready balanced etc, these will be fitted with black rubber valves.
Check it out, if you want the metal valves the will need to be pre-ordered in cost of valves £10 + vat
Let me know
TC
You are looking at a proud owner of the new OZ's the will be with me on Wed.
A word of advice on the pic it shows a metal valve and cap (only silver) the wheels & tyres come staight from the suppliers to the store in Essex, ready balanced etc, these will be fitted with black rubber valves.
Check it out, if you want the metal valves the will need to be pre-ordered in cost of valves £10 + vat
Let me know
TC
#30
Rico,
if you need a shot of a digital camera I work at The Gyle in Edinburgh and could possibly meet you sometime to get photo taken.
ps I would also like a set of these wheels.
if you need a shot of a digital camera I work at The Gyle in Edinburgh and could possibly meet you sometime to get photo taken.
ps I would also like a set of these wheels.