Camber adjustment?
#1
Scooby Regular
Thread Starter
Join Date: Apr 2003
Location: Aviemore, Scottish Highlands
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
When i picked up my MY96 sti in june it had a SLIGHT pull to the left. Put it into National Tyres and my mate did the tracking(on the side!!!). It came back to me with a NIGHTMARE of a pull to the left!! I meen REALLY bad. It goes round corners itself!
Took it back, got it done again and it was the same.
Took it to get all 4 wheels Laser tracked the other day. All wheels exept the front N/S is spot on. The guy just couldnt get the camber to straighten up!!
He couldnt tell why because he would have to take things off to see what the problem was.
Any sugestions?
Could something be bent or damaged?
Took it back, got it done again and it was the same.
Took it to get all 4 wheels Laser tracked the other day. All wheels exept the front N/S is spot on. The guy just couldnt get the camber to straighten up!!
He couldnt tell why because he would have to take things off to see what the problem was.
Any sugestions?
Could something be bent or damaged?
#6
Scooby Regular
Thread Starter
Join Date: Apr 2003
Location: Aviemore, Scottish Highlands
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
Ok. Didnt scan very well.
Heres the results.
Front n/s(the problem wheel) -1.14(well in the red)
Front o/s -0.35
Rear n/s -1.46(but in the green)
Rear o/s -0.43
Hope this helps.
Heres the results.
Front n/s(the problem wheel) -1.14(well in the red)
Front o/s -0.35
Rear n/s -1.46(but in the green)
Rear o/s -0.43
Hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Reshard1977
General Technical
9
18 September 2015 08:58 PM