Notices
Wheels And Tyres For Sale This forum contains only wheels and tyres offered for sale by our members.

Gloss Black Rota Fighter Drift 18"x10" ET20 100/114 PCD Pirelli P-Zero Tyres

Old Mar 24, 2015 | 12:06 PM
  #1  
WhiteWagonMan's Avatar
WhiteWagonMan
Thread Starter
Scooby Regular
iTrader: (34)
 
Joined: Apr 2009
Posts: 1,419
Likes: 0
From: Trying to pull a 10 second 1/4 mile running a standard 2.0ltr engine...
Default Gloss Black Rota Fighter Drift 18"x10" ET20 100/114 PCD Pirelli P-Zero Tyres

Rota Fighter Drift Ultralite 18"x10" 100/114 PCD ET20 Alloys With Pirelli P-Zero 265x35x18 Time Attack stamped Tyres(they have T/A branded in sidewalls and are official control tyres from the Time Attack series).

The wheels are in excellent condition with only a couple of very minor marks on them which are hard too see even in the pics,i will also include a full set of gloss black tuner wheels nuts with the wheels.

They wheels were originally white but i fancied a change and had them painted gloss black.

The tyres are also in great condition with approx 6 to 7mm left on them allround so plenty of life left in them yet.

These are the same wheels Andy Forrest runs on his car in the time attack series and on the handling circuit,but his are copper/bronze colour.

Awesome wheel and tyre combo and a bargain for someone SOLD.......THE WHEELS ARE LOCTAED AT SHEFFIELD SUBARU SERVICE JUST OFF M1 MOTORWAY NEAR MEADOWHALL.









Pics of the marks which are very minor surface/paint damage and can hardly be seen when the wheels are clean and touched up with a black cover paint pen.


And 6.5mm left on the tyres so more than i estimated.


Last edited by WhiteWagonMan; Apr 3, 2015 at 04:24 PM. Reason: forgot about my nuts...LOL.
Reply
Old Mar 27, 2015 | 08:20 PM
  #2  
WhiteWagonMan's Avatar
WhiteWagonMan
Thread Starter
Scooby Regular
iTrader: (34)
 
Joined: Apr 2009
Posts: 1,419
Likes: 0
From: Trying to pull a 10 second 1/4 mile running a standard 2.0ltr engine...
Default

More pics and info added/updated.
Reply
Old Mar 28, 2015 | 10:24 AM
  #3  
whiteRA's Avatar
whiteRA
Scooby Regular
iTrader: (11)
 
Joined: Jun 2009
Posts: 280
Likes: 0
Default

Location?
Reply
Old Mar 28, 2015 | 10:42 AM
  #4  
veerinder9's Avatar
veerinder9
Scooby Regular
iTrader: (1)
 
Joined: Jul 2012
Posts: 1,743
Likes: 0
From: wolverhampton
Default

How much for whole car
Reply
Old Mar 28, 2015 | 11:02 AM
  #5  
WhiteWagonMan's Avatar
WhiteWagonMan
Thread Starter
Scooby Regular
iTrader: (34)
 
Joined: Apr 2009
Posts: 1,419
Likes: 0
From: Trying to pull a 10 second 1/4 mile running a standard 2.0ltr engine...
Default

Originally Posted by whiteRA
Location?
The car is stored at sheffield subaru service just off the m1 near meadowhall and all parts can be collected from there.
Reply
Old Mar 28, 2015 | 11:04 AM
  #6  
WhiteWagonMan's Avatar
WhiteWagonMan
Thread Starter
Scooby Regular
iTrader: (34)
 
Joined: Apr 2009
Posts: 1,419
Likes: 0
From: Trying to pull a 10 second 1/4 mile running a standard 2.0ltr engine...
Default

Originally Posted by veerinder9
How much for whole car
Not alot of it left now im affraid matey.
Reply
Old Mar 28, 2015 | 11:06 AM
  #7  
veerinder9's Avatar
veerinder9
Scooby Regular
iTrader: (1)
 
Joined: Jul 2012
Posts: 1,743
Likes: 0
From: wolverhampton
Default

Originally Posted by WhiteWagonMan
Not alot of it left now im affraid matey.
Ah it's a beauty. Plans for it now or jst breaking?
Reply

Trending Topics

Old Mar 28, 2015 | 11:14 AM
  #8  
WhiteWagonMan's Avatar
WhiteWagonMan
Thread Starter
Scooby Regular
iTrader: (34)
 
Joined: Apr 2009
Posts: 1,419
Likes: 0
From: Trying to pull a 10 second 1/4 mile running a standard 2.0ltr engine...
Default

she sure was no plans mate just break it down until just the shell is left and then scrap it.
Reply
Old Mar 28, 2015 | 11:24 AM
  #9  
bustaMOVEs's Avatar
bustaMOVEs
Scooby Regular
iTrader: (31)
 
Joined: Jan 2012
Posts: 12,979
Likes: 30
From: The 2dr club
Default

Nice wheels, just like the ce28s shame there 18s though. Is that bonnet gone? Ally?
Reply
Old Mar 28, 2015 | 11:28 AM
  #10  
WhiteWagonMan's Avatar
WhiteWagonMan
Thread Starter
Scooby Regular
iTrader: (34)
 
Joined: Apr 2009
Posts: 1,419
Likes: 0
From: Trying to pull a 10 second 1/4 mile running a standard 2.0ltr engine...
Default

Cheers buddy..Bonnet prov sold but will be back up for sale if the guy dont come and pay for it as its been over 5 weeks now,yes its ally as its the original sti 5 bonnet that came with the car.
Reply
Old Mar 28, 2015 | 03:55 PM
  #11  
whiteRA's Avatar
whiteRA
Scooby Regular
iTrader: (11)
 
Joined: Jun 2009
Posts: 280
Likes: 0
Default

Too far away for me for the wheels.
Nice bonnet scoops though.
I can see a roger Clarke reverse scoop in the usual position but what make is the one in the middle at the front??
Reply
Old Mar 28, 2015 | 05:06 PM
  #12  
WhiteWagonMan's Avatar
WhiteWagonMan
Thread Starter
Scooby Regular
iTrader: (34)
 
Joined: Apr 2009
Posts: 1,419
Likes: 0
From: Trying to pull a 10 second 1/4 mile running a standard 2.0ltr engine...
Default

Yup rcm reverse scoop at the rear and the front one is a time attack vent from darren at ABW who also makes the wide arch kits,i first saw them on the zen performance time attack subaru and just had to have them for mine.
Reply
Old Mar 28, 2015 | 09:52 PM
  #13  
whiteRA's Avatar
whiteRA
Scooby Regular
iTrader: (11)
 
Joined: Jun 2009
Posts: 280
Likes: 0
Default

Cheers for that - will get onto Darren at ABW and get me one of those!


Have looked in to ABW arches on my classic too, and wanted to know if you had to "tub the arches" to fit your 10 inch wheels - or just cut out the arches to the usual specification.


Also, did you notice any handling issues with driving 10 inch wheels on a classic on the road ( other than the obvious increased grip) ?
Reply
Old Mar 29, 2015 | 11:40 AM
  #14  
joe v3sti's Avatar
joe v3sti
Scooby Regular
iTrader: (8)
 
Joined: Dec 2011
Posts: 3,244
Likes: 23
From: yorkshire
Default

Slightly off topic here mate but ive seen in your sig you were running an SC42 at 505bhp!
Blimey thats a lot! Could i ask what size engine that was on and at what boost level?
Genuine question.... Only asking as im waiting to have my sc46 mapped

Joe
Reply
Old Mar 29, 2015 | 12:57 PM
  #15  
WhiteWagonMan's Avatar
WhiteWagonMan
Thread Starter
Scooby Regular
iTrader: (34)
 
Joined: Apr 2009
Posts: 1,419
Likes: 0
From: Trying to pull a 10 second 1/4 mile running a standard 2.0ltr engine...
Default

Originally Posted by whiteRA
Cheers for that - will get onto Darren at ABW and get me one of those!


Have looked in to ABW arches on my classic too, and wanted to know if you had to "tub the arches" to fit your 10 inch wheels - or just cut out the arches to the usual specification.


Also, did you notice any handling issues with driving 10 inch wheels on a classic on the road ( other than the obvious increased grip) ?
No probs with the 10" wheels as the offset was perfect at ET20 so they fitted spot on under the arches with no further mods needed.

No handling issues either mate,the handling and grip especially after fitting coilovers and getting the geometery setup done was very extreme,it was like driving an F1 car.
Reply
Old Mar 29, 2015 | 01:03 PM
  #16  
WhiteWagonMan's Avatar
WhiteWagonMan
Thread Starter
Scooby Regular
iTrader: (34)
 
Joined: Apr 2009
Posts: 1,419
Likes: 0
From: Trying to pull a 10 second 1/4 mile running a standard 2.0ltr engine...
Default

Originally Posted by joe v3sti
Slightly off topic here mate but ive seen in your sig you were running an SC42 at 505bhp!
Blimey thats a lot! Could i ask what size engine that was on and at what boost level?
Genuine question.... Only asking as im waiting to have my sc46 mapped

Joe
That was on a standard JDM 2.0ltr blob sti engine mate with only 27k miles at the time of mapping,the boost was at 1.85bar with 20% meth+v-power mix.

There was more left from the turbo too but we thought 505/456 was a great figure on a standard 2.0ltr lump and decided not to push the engine any further for safety reasons.
Reply
Old Mar 30, 2015 | 03:20 PM
  #17  
MTLtypeR's Avatar
MTLtypeR
Scooby Newbie
 
Joined: Sep 2014
Posts: 9
Likes: 0
From: Dorking
Default

The wheels still for sale mate and could you post to surrey?
Reply
Old Mar 30, 2015 | 07:15 PM
  #18  
WhiteWagonMan's Avatar
WhiteWagonMan
Thread Starter
Scooby Regular
iTrader: (34)
 
Joined: Apr 2009
Posts: 1,419
Likes: 0
From: Trying to pull a 10 second 1/4 mile running a standard 2.0ltr engine...
Default

They are prov sold mate...All pm`s have been replied too.
Reply
Old Apr 3, 2015 | 04:25 PM
  #19  
WhiteWagonMan's Avatar
WhiteWagonMan
Thread Starter
Scooby Regular
iTrader: (34)
 
Joined: Apr 2009
Posts: 1,419
Likes: 0
From: Trying to pull a 10 second 1/4 mile running a standard 2.0ltr engine...
Default

SOLD
Reply
Old Jun 7, 2015 | 02:34 PM
  #20  
kaine19's Avatar
kaine19
Scooby Regular
 
Joined: Apr 2014
Posts: 86
Likes: 0
From: Manchester
Default

I no this is. But I am going for a certain look. Did you have any bother with them front lights? I.e police
Reply
Old Jun 9, 2015 | 06:39 PM
  #21  
tractiont's Avatar
tractiont
Scooby Regular
 
Joined: Jan 2006
Posts: 70
Likes: 0
From: Ashford,Middlesex
Default

Pm sent
Reply
Old Oct 15, 2015 | 11:29 PM
  #22  
Jdm-brad's Avatar
Jdm-brad
Scooby Regular
iTrader: (1)
 
Joined: Jun 2013
Posts: 191
Likes: 0
From: Leicester
Default

Originally Posted by WhiteWagonMan
That was on a standard JDM 2.0ltr blob sti engine mate with only 27k miles at the time of mapping,the boost was at 1.85bar with 20% meth+v-power mix.

There was more left from the turbo too but we thought 505/456 was a great figure on a standard 2.0ltr lump and decided not to push the engine any further for safety reasons.
Dont suppose the turbo is still for sale is it?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JimBowen
ICE
5
Jul 2, 2023 01:54 PM
S600HBY
Wheels And Tyres For Sale
11
Nov 1, 2015 04:23 PM
shorty87
Other Marques
0
Sep 25, 2015 08:52 PM
shorty87
Wheels And Tyres For Sale
0
Sep 25, 2015 08:36 PM


Thread Tools
Search this Thread

All times are GMT +1. The time now is 04:06 PM.