400+bhp turbo needed
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Jan 2011
Location: near swansea
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
400+bhp turbo needed
Hey guys.
I'm after either a
Sc42 billet
Sc46 billet
Md321t
In good condition with as little use as poss.
So what have have you got guys?
I will consider other turbos other than the top 3.
So if you have got a 400bhp turbo or know someone who wants to part with one get in touch.
Cash ready and waiting to be spent.
I'm after either a
Sc42 billet
Sc46 billet
Md321t
In good condition with as little use as poss.
So what have have you got guys?
I will consider other turbos other than the top 3.
So if you have got a 400bhp turbo or know someone who wants to part with one get in touch.
Cash ready and waiting to be spent.
#3
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Jan 2011
Location: near swansea
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Hi mate. I did consider the md321h but as I'm after 400+ I was told by my mapper to go larger just in case I fall short of the mark. But if I can't find anything else I'll be in touch for your mates number.
#4
Scooby Regular
iTrader: (15)
Join Date: Jul 2009
Location: Somewhere halfway between heaven and hell, some call it earth!
Posts: 1,305
Likes: 0
Received 0 Likes
on
0 Posts
I have a RCM400 for sale. Covered 10k on mine over 2 years. Run 402 hp on it at 1.7 bar tailing to 1.5. Was looking for £800 but will budge a little
#5
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Jan 2011
Location: near swansea
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
I think I need something slightly bigger than a rcm400 as I won't b running as much boost as I am on ecutek that's y I need a larger turbo so that I can reach the figures on a lower level of boost
#6
Scooby Regular
iTrader: (1)
Join Date: Jan 2003
Location: Kent
Posts: 352
Likes: 0
Received 0 Likes
on
0 Posts
Hi
Got a RCM420 with 76mm inlet.
Had done 7500miles, bought for my 2.5 but never used due to forged rebuild and want nearer 500hp. Believe it ran 400hp at 1.4bar boost
Looking for £750
Let me know if interested
Got a RCM420 with 76mm inlet.
Had done 7500miles, bought for my 2.5 but never used due to forged rebuild and want nearer 500hp. Believe it ran 400hp at 1.4bar boost
Looking for £750
Let me know if interested
#7
Scooby Regular
iTrader: (15)
Join Date: Jul 2009
Location: Somewhere halfway between heaven and hell, some call it earth!
Posts: 1,305
Likes: 0
Received 0 Likes
on
0 Posts
Understand where you're coming from mate but always got the option of aftermarket boost controller to go above the 1.55 bar restriction or methanol to up the power
Trending Topics
#11
hi mate i have a rcm 450 on car at mo any trial welcome made 470 @1.65 mapped with a simtek by bob rawle on a forgeded 2.0 L cdb ....turbo is has covered less than 2k and bought new in may from advanced automotive ..it has a ceramic housing and will do a deal with intake pipe too.how much of a rush are you in ??....andy 07985988064
#12
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Jan 2011
Location: near swansea
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Hi andy wot rpm do u hit full boost on the 450 and what supporting modes are on your car? And are u running anti lag on the simtek?
Last edited by scoobymikeSTI; 02 November 2011 at 05:10 PM.
#18
Scooby Regular
iTrader: (4)
Join Date: Feb 2010
Location: cornwall
Posts: 1,151
Likes: 0
Received 0 Likes
on
0 Posts
hi mate i have a rcm 450 on car at mo any trial welcome made 470 @1.65 mapped with a simtek by bob rawle on a forgeded 2.0 L cdb ....turbo is has covered less than 2k and bought new in may from advanced automotive ..it has a ceramic housing and will do a deal with intake pipe too.how much of a rush are you in ??....andy 07985988064
well done you m8 was that on pump fuel?
Thread
Thread Starter
Forum
Replies
Last Post
MH-Racing
Subaru Parts
18
18 October 2015 04:49 PM
robbie1988
Wanted
2
13 September 2015 09:25 AM
Scooby-Doo 2
Wheels And Tyres For Sale
1
09 September 2015 06:51 PM