wrx mark

iTrader: (1)

hi im after a map sensor for a early classic

andys scooby

yes mate i have one for a 1995 wrx make me an offer

53

iTrader: (41)

Why do you need one mate ? If you are having any modding/mapping done get a late STi classic one which can read 1.7 rather than the early classic ones which cut at 1.2. I could sell you one but it's a missed opportunity if you are upgrading. FWIW 99Sti sensors go for about £45.

wrx mark

iTrader: (1)

have got code 45 map sensor?i am just in middle of tuning/getting it remapped (esl live) will a later sti one plug straight in

53

iTrader: (41)

You just cut the exiting loom (3 wires) and solder or splice on the new.

HDC Subaru stock them if you want to get one, thats where I had mine delivered from.

Allows you to run something like 1.4bar in the mid range for extra grunt

wrx mark

iTrader: (1)

thanks for that m8 is it 99sti only or late sti classic and is it just the map sensor i change or boost solonoid aswell

53

iTrader: (41)

You just need the map sensor and it's plug. Ask for the plug and about 6" inches of cable that goes into it to splice onto your existing wires. The fellas name at HDC is Howard, he is really good but you MUST ask for the plug that goes with the sensor or you will end up paying 2 lots on postage like I did

The wiring on the splice is a different colour between years so I will have a look at mine tomorrow to check who gets it on with who. I can't remember lol but someone will know anyhow.

You need Phase 2 STi ideally IIRC, ie full facelift V5 I think they are refered to.