WATER HEADER TANK FOR VWRX PROJECT
#1
Scooby Newbie
Thread Starter
Join Date: Jul 2006
Location: Essex
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
WATER HEADER TANK FOR VWRX PROJECT
desperatly need header tank for early impreza wrx 2.0turbo engine, I think its around the my94-95 ish.
As you may have seen on some of my last posts, have been fitting an impreza wrk lump into my campervan, its running like a dream, but am having water/overheating problems . and it has blown my header tank apart!
can anybody help
cheers
paul
As you may have seen on some of my last posts, have been fitting an impreza wrk lump into my campervan, its running like a dream, but am having water/overheating problems . and it has blown my header tank apart!
can anybody help
cheers
paul
#3
Scooby Newbie
Thread Starter
Join Date: Jul 2006
Location: Essex
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
hi mate
its the one that sits on the engine, on side of intake manifold.
small square thing with pressure cap.
not bothered about how good it looks just need one thats not split/broken
paul
its the one that sits on the engine, on side of intake manifold.
small square thing with pressure cap.
not bothered about how good it looks just need one thats not split/broken
paul
#4
Former Sponsor
iTrader: (48)
That car is fitted with a plastic header tank which has a non return valve in one of the inlet/outlet pipes. About £65 from Roger Clark Motorsport or secondhand from API LTD but they have a tendency to break at the top pipe boss so secondhand is a bit dodgy.
I have a zinc die cast item from a later Subaru that has no non return valve.
£40 posted "Special Delivery" inclusive of Paypal.
harveysmith1@btopenworld if interested
I have a zinc die cast item from a later Subaru that has no non return valve.
£40 posted "Special Delivery" inclusive of Paypal.
harveysmith1@btopenworld if interested
#5
Scooby Newbie
Thread Starter
Join Date: Jul 2006
Location: Essex
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
will the zinc one you mention bolt in standard poss on side of inlet manifold and tie in with all the pipes/hoses?
its just that im a little tight for space.... engine bay was only designed for a 1.6 aircooled beetle engine so am pushing the space to the limits..lol
and yes my tank blew the top breather hose boss clean off...
its just that im a little tight for space.... engine bay was only designed for a 1.6 aircooled beetle engine so am pushing the space to the limits..lol
and yes my tank blew the top breather hose boss clean off...
Last edited by Bugmad; 30 July 2007 at 02:07 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM