When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I need narrow track shafts to suit a hawkeye widetrack rear diff but utilising 5x124 hubs
What I'm asking is, what car will you need shafts off to do what your doing?
As first post don't make any sense, you want shafts off a 5x114 hub, off a Hawkey etc.
That just don't make sense as a hawk with 5x114 shafts will almost certainly be from a widetrack.
Are you sure non widetrack 5x100 shafts won't fit your rear diff? Or is the stud into shaft different size or something? As I thought only r160 and r180 and different size shafts, and the 5x114 will only be at hub end?
So I'm guessing you just need non widetrack r180 shafts and done?
If so readily available from mattyb or Scott a SS as said above
It is the splines counts that different, I was hoping someone would have a set to compare
R160 shafts will not fit 5c114 hubs. And wide track shafts will not fit a classic.
So if anyone has any 180 narrow track or type r shafts etc to count the splines and dimensions on both ends that would be great.... as i have no idea what I need....
I see, so I would think that any non widetrack shafts will do from a r180 then as I belive they all same, only the bolt holes for the hawk diff maybe more spaced apart for prop (have you checked that? Does your prop line up with diff holes?)
I see, so I would think that any non widetrack shafts will do from a r180 then as I belive they all same, only the bolt holes for the hawk diff maybe more spaced apart for prop (have you checked that? Does your prop line up with diff holes?)
Not yet, but I am aware it may need the joint changing
I thought some rear shafts had different Spline counts?