effkay

Hi all,

Just a query regarding my alarm.

I have the M30 Sigma system on my Blobeye with 2 AC110 key fobs. Last week the fobs stopped working - I opened doors using fob, started car, drove 5mins to Tesco, then fob would not lock car.

Have had to use the keypad since. Does anyone know why both fobs (main and spare) would suddenly stop working? Can't believe it is radio lock out as been to these locations many times before and both fobs have new batteries and the red LED is working on the fobs when the button is pressed.

I have found this: http://www.scoobypedia.co.uk/index.p...RemoteControls

Can someone confirm these are the correct steps to get the fobs working again?

Any other ideas if this doesn't work? Hopefully the above will work and its not an issue with the alarm receiver or similar. Otherwise its a trip to Three Arches.

Thanks.

johned

Are the batteries in the fobs ok.

effkay

Got it working. Followed instructions on link.

Main key now works (I had replaced that battery), but spare didn't connect. Will be fine for now. Got a spare battery so will change the spare and get that working this weekend hopefully.

Cheers!

tychid rb320

Have to have both keys in car when resetting code or the other will not work when battery is changed you have to have all keys present and working I've changed the whole system on one they can be a pain