Sensors, cables and looms for aftermarket ECUs
#1
Sensors, cables and looms for aftermarket ECUs
We have just introduced a range of sensors and cable assemblies, all intended to make the job of after-market ecu installations that much easier.
Although initially targeted at the Syvecs ecu, the cables and sensors are just as suited to other ecus such as MoTeC, SimTek etc.
In addition to our existing wideband Lambda (NTK L2H2) and cable, the range now includes:
All prices +VAT.
We will be adding a 3 bar MAP sensor and knock sensor to the range in due course.
All cables use thin-wall insulated wire, sleeved in high-temperature black fibreglass sleeving with heatshrink at each end. Syvecs sensor linearisation files available for download, with calibration data available for other applications if needed.
Along with Toucan, the highly successful touchscreen interface for Syvecs, all assemblies can be bought from our website.
Any questions, please ask
Although initially targeted at the Syvecs ecu, the cables and sensors are just as suited to other ecus such as MoTeC, SimTek etc.
In addition to our existing wideband Lambda (NTK L2H2) and cable, the range now includes:
- 10 bar AEM Pressure sensor, suitable for oil or fuel, 1/8" NPT thread, complete with 1.8m cable - £64.99
- Air Charge Temperature sensor, M10x1.25 thread, with 1.8m cable - £34.99
- Oil temperature sensor, 1/8" NPT thread, complete with 1.8m cable - £34.99
- A Subaru-specific loom allowing oil temperature and pressure, air intake temperature and fuel pressure to be wired in using a single, neat loom, with the connectors all in the right place - £99.99 for just the loom, or £234.99 including all four sensors.
- Subaru 300mm braided hose extension and t-piece, plus thread adapter for Cylinder 3, allowing easy fitting of sensors in the "correct" places - £23.99
All prices +VAT.
We will be adding a 3 bar MAP sensor and knock sensor to the range in due course.
All cables use thin-wall insulated wire, sleeved in high-temperature black fibreglass sleeving with heatshrink at each end. Syvecs sensor linearisation files available for download, with calibration data available for other applications if needed.
Along with Toucan, the highly successful touchscreen interface for Syvecs, all assemblies can be bought from our website.
Any questions, please ask
Last edited by JTinnovations; 14 February 2012 at 12:17 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM