SimTek/NO2 breaks cover!
#1
Former Sponsor
Thread Starter
Join Date: Mar 2008
Location: Enginetuner.co.uk Plymouth 4wd Dyno Engine machining and building Apexi Ecutek Simtek mapping+more!
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
SimTek/NO2 breaks cover!
SimTek/NO2 breaks cover!
Developed by Andy and Steve from SimTek, with much input from Andy F, initial dyno testing has proven fruitful with the SimTek ECU being used to run the wet nitrous system on our 2 litre classic. With such illustrious designers, and our staffs’ careful installation, naturally it worked like a charm right out of the box, adding an easy 100 ft lbs at 4000 rpm, and smiles all round. Utilising direct solenoid links, the SimTek will allow for a wide range of control strategies, including rpm and gear choice. Map switching will cover various fuelling and ignition profiles to suit. In short a leap ahead for drag stars!
We will be carrying out much more testing and setting up over the coming weeks, so interested parties should watch this space..
Developed by Andy and Steve from SimTek, with much input from Andy F, initial dyno testing has proven fruitful with the SimTek ECU being used to run the wet nitrous system on our 2 litre classic. With such illustrious designers, and our staffs’ careful installation, naturally it worked like a charm right out of the box, adding an easy 100 ft lbs at 4000 rpm, and smiles all round. Utilising direct solenoid links, the SimTek will allow for a wide range of control strategies, including rpm and gear choice. Map switching will cover various fuelling and ignition profiles to suit. In short a leap ahead for drag stars!
We will be carrying out much more testing and setting up over the coming weeks, so interested parties should watch this space..
#2
Scooby Regular
iTrader: (1)
Join Date: May 2007
Location: cymraegscoobieclub.co.uk
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
Excellant news glad to see simtek technology moving on. specially intrested in the control of nitrous which at the moment thinking of fitting but might hold off until i see how the simtek develops with this. looking forward to the results.
#5
Scooby Regular
iTrader: (3)
I Just had a simtek fitted and re mapped by Steve Simpson. Had a Spec C engine fitted in my WRX. Steve took care of all the new wiring mods needed to fit the UK wiring loom and made a smasing job of the re map. I got tons of power and torque with no lag at all.
Had the anti lag and launch control added, and i have 2 maps, one running V Power and the other can run on any fuel when i get stuck.
I rate them well, and a good recommendation to SimTek and Steve SImpson
Had the anti lag and launch control added, and i have 2 maps, one running V Power and the other can run on any fuel when i get stuck.
I rate them well, and a good recommendation to SimTek and Steve SImpson
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Pro-Line Motorsport
Car Parts For Sale
2
29 September 2015 07:36 PM