It probably is on here somewhere, but I cannot find it

Looking for help on what the tracking for my standard sti spec d (2006) should be set to please..

What toe in or out should it be set to?

It is pulling very hard to the right on acceleration

Tyre pressures set to 38 psi front, 35 rear

 

Mine pulled to one side on acceleration - I swapped the front tyres over and it pulled to the other side.
I strongly suggest you try this before spending money elsewhere.

 

I ran on std suspension for daily driver

Front
1 degree negative camber each side
Zero toe
33 psi

Rear
Rear camber is fixed so will be about 1.3degree each side
Zero toe
31 psi

 

Thanks guys- It is stock suspension and I will try swapping tyres over and I have a spare set of wheels and tyres to try and will also try a lower psi , seems mixed reviews on tyre pressures.

Going to get my local chemix to 4 wheel laser check me thinks..