Body roll/Oversteer
#1
Scooby Regular
Thread Starter
iTrader: (7)
Join Date: Nov 2009
Location: London
Posts: 867
Likes: 0
Received 0 Likes
on
0 Posts
Body roll/Oversteer
I own a 2004 sti running about 340/330 but feel when going into corners or just generally speeding round a dual carrigeway bend, that the car seems to have more body roll than what I would have expected.
I already have BC Coilovers and Proxy Toyo P1's tyres with good thread and have had 4 wheel alignment done.
Has anyone else felt this from a similiar shape/setup?
And if so what do people recommend to remove the oversteer, or atleast minimise it.
Thanks.
I already have BC Coilovers and Proxy Toyo P1's tyres with good thread and have had 4 wheel alignment done.
Has anyone else felt this from a similiar shape/setup?
And if so what do people recommend to remove the oversteer, or atleast minimise it.
Thanks.
#2
Scooby Regular
Join Date: Feb 2005
Location: Germany
Posts: 512
Likes: 0
Received 0 Likes
on
0 Posts
Whoops, sorry, some of the info i needed was in this post. Just need your alignment, tyre pressures, ride height. Wait, is the number you posted above your ride height or spring rate?
#4
Scooby Regular
iTrader: (18)
Body roll in general usually induces understeer rather than oversteer. ??
You may have reduced your roll centre too much with the BC's, may want to get Ball joint extenders. See thread below:
https://www.scoobynet.com/suspension...rth-doing.html
You may have reduced your roll centre too much with the BC's, may want to get Ball joint extenders. See thread below:
https://www.scoobynet.com/suspension...rth-doing.html
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM