shocks and springs
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Feb 2010
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
shocks and springs
I have some shocks with lowered springs already fitted and i want to put them on my scoob,is it just a case of take the old ones off and bolt in the new ones or is there more to it??????
#2
Scooby Newbie
Join Date: May 2010
Location: Norristhorpe, near Huddersfield
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Short answer.... If they are the correct fitment, then yes.
Longer answer.... You have to remove the Wheels, rear seat, etc. etc. to do it. Then you need to check the alignment and camber.
There is a walkthrough / instructions withpics in interwebland if you search for them. Most of them tell you that you will need to cut the brake line bracket on the strut, i found that i didnt need to, just turning the banjo bolt around let it fit through.
Longer answer.... You have to remove the Wheels, rear seat, etc. etc. to do it. Then you need to check the alignment and camber.
There is a walkthrough / instructions withpics in interwebland if you search for them. Most of them tell you that you will need to cut the brake line bracket on the strut, i found that i didnt need to, just turning the banjo bolt around let it fit through.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM