geom settings
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Sep 2007
Location: chester
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
geom settings
hi poeple
just asking wot you guys are running
i have a 2002 bugeye wrx and ive just fitted some bc coilovers
wot set up would be best for fast road use and to get rid of the standard understeer
cheers
neil
just asking wot you guys are running
i have a 2002 bugeye wrx and ive just fitted some bc coilovers
wot set up would be best for fast road use and to get rid of the standard understeer
cheers
neil
#2
Scooby Senior
iTrader: (3)
Join Date: Jun 2006
Location: Slowly rebuilding the kit of bits into a car...
Posts: 14,333
Likes: 0
Received 0 Likes
on
0 Posts
IMHO you need a 22mm adjustable rear anti-roll bar from Whiteline, (or others), to kill the understeer.
As for geometry, I've lost my set-up due to raising the car by 40mm.
A search on here will find some advice.
dunx
As for geometry, I've lost my set-up due to raising the car by 40mm.
A search on here will find some advice.
dunx
#4
Scooby Regular
iTrader: (2)
Join Date: Jan 2007
Location: l'on n'y peut rien
Posts: 2,922
Likes: 0
Received 0 Likes
on
0 Posts
Or as close as you can get to it, ensuring the same both sides.
If you DO go fro 1.5 degrees, be ready for some extra tyre wear
Mine was done at Carnetix, in Melton Mowbray. Excellent service, everything discussed and explained, and a nicer set of folk I've yet to meet.
They are highly recommended.
If you DO go fro 1.5 degrees, be ready for some extra tyre wear
Mine was done at Carnetix, in Melton Mowbray. Excellent service, everything discussed and explained, and a nicer set of folk I've yet to meet.
They are highly recommended.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM