Alignment / geometry settings MY03 JDM STI
11 January 2009, 10:51 AM
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: May 2006
Location: Scotland
Posts: 1,394
Likes: 0
Received 0 Likes
on
0 Posts
Alignment / geometry settings MY03 JDM STI
Hi folks,
Where can I get Alignment / geometry settings for my 2003 STI Impreza. I would like standard settings and if possible some suggetions on what might be better. Required for both Front and Rear.
The car is lowered on BC coilovers.
Thanks.
Where can I get Alignment / geometry settings for my 2003 STI Impreza. I would like standard settings and if possible some suggetions on what might be better. Required for both Front and Rear.
The car is lowered on BC coilovers.
Thanks.
13 January 2009, 12:28 PM
#2
Scooby Regular
iTrader: (1)
Join Date: Feb 2006
Location: Warwickshire, UK
Posts: 2,099
Likes: 0
Received 0 Likes
on
0 Posts
You won't get stock settings on a lowered car, front castor and rear camber is changed by lowering and you can't adjust them back without making them adjustable!
Why fit coilovers and ask for stock settings anyway!
Would suggest:-
0.75 degrees of -ve camber at the front with 0 to 0.15 degrees of toe in.
Rear parallel.
No rear thrust angle!
Simon
Why fit coilovers and ask for stock settings anyway!
Would suggest:-
0.75 degrees of -ve camber at the front with 0 to 0.15 degrees of toe in.
Rear parallel.
No rear thrust angle!
Simon
23 August 2009, 10:06 PM
#5
Scooby Regular
Join Date: Jun 2007
Location: fife scotland
Posts: 550
Likes: 0
Received 0 Likes
on
0 Posts
what you req,is more caster on the front .as you have coilovers ///turn your top mounts around or swap sides to gain more caster ,fit anti lift kit ,then adjust camber with camber bolts .standard sibbie on the top whiteline below 14mm bolt to give you the adjustment you want .
the rear can take 2x camber bolts 14mm do the job once and do it right.
the right parts fitted with the geo set will pay dividends
cheers geo
Thread
Thread Starter
Forum
Replies
Last Post