please can advise me on reoving and fitting a wishbone ie if i remove will i need to support anything or will the suspension drop. never done before

 

simple job m8, support car on stands remove split pin on balljoint rem/castle nut, shock with a hammer on the wishbone where the balljoint comes through lever down to clear w/bone //rem front w/bone bolt rem both bolts on rear mount (ALK its now on the deck



question why are you removing the arm
is it an sti with alloy arms if it is only tap the btm w/bone lightly because you have a collet in the hole where the btm ball joint sits (dont loose it m8 cheers geo

 

thanks m8

removing off a wrx classic import but due to buying the car could not see that this was bent so got to replace

thanks again