Suspension on my P1.
#1
Scooby Regular
Thread Starter
Join Date: Dec 2005
Location: Herefordshire
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Suspension on my P1.
Suspension on my P1.
Ok what should I have on my P1, I have the 18” OZ alloys on but it seems to be rubbing on all 4 corners when I have a load in, 3 or more people!
I don’t know what im running at the moment but its Red and says Subaru on it!
Thanks for your help.
Mark
Ok what should I have on my P1, I have the 18” OZ alloys on but it seems to be rubbing on all 4 corners when I have a load in, 3 or more people!
I don’t know what im running at the moment but its Red and says Subaru on it!
Thanks for your help.
Mark
#2
Scooby Regular
Join Date: May 2004
Location: in motoring nirvana.....
Posts: 2,443
Likes: 0
Received 0 Likes
on
0 Posts
Sounds to me like you may have the wrong size tyres on. Should be 215/35/18 or 225/35/18.
The standard P1 suspension is very good - so maybe just new shocks will do the trick
The standard P1 suspension is very good - so maybe just new shocks will do the trick
#3
If you have positive or very little negative camber the tyre can contact the edge of the wing more readily. If your car has high mileage the springs could have sagged and may need replacing. Would be worth getting the alignment checked.
GlenBec
GlenBec
#4
Scooby Regular
Thread Starter
Join Date: Dec 2005
Location: Herefordshire
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
ok thanks people, will check the alignment first but might have to look into the shocks first! The car has done around 43K so it might be getting to that age were it needs a bit of work!
#5
Scooby Regular
Join Date: Jul 2005
Location: www.scoobycity.co.uk
Posts: 1,257
Likes: 0
Received 0 Likes
on
0 Posts
#6
Scooby Regular
Thread Starter
Join Date: Dec 2005
Location: Herefordshire
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM