I have a 93 wrx i have a uprated and lowered spring kit on it 1"lower i also have uprated sway bars and the anti lift kit does anyone know what settings to geom my car to or a good starting point thanks
lee

 

Hi Lee.

See my thread (The most Amaizing .....).

I don't have any of the gizmo's you have fitted so this may not be relavent to you.

I started off with the prodrive settings which can be found on the FAQ. I then spent the next few months nipping back into RGS Motorsport in Wellingborough to have it tweaked this way and that to suit.

Cheers

Simon

 

MRT suggested the following for use with their anti lift kit and roll bars:

Front
.75 degrees negative camber
0 (zero) Toe

Rear
Even Camber
1.5 mm toe OUT per side (3mm overall)

 

thanks for your replies
lee