Anti-roll bar question
28 December 2003, 02:23 PM
#1
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: Jan 2003
Location: South Wales - Stuck on this rollercoaster, get me off!!
Posts: 5,350
Likes: 0
Received 0 Likes
on
0 Posts
From what I can understand I have uprated 22mm front and rear anti-roll bars, which were on the car when I bought it. A recent service confirmed that the bushes were worn and need replacing,
Where is the best place to source these from?
If car model is required, its a Sti V Type R Ltd.
simb
Where is the best place to source these from?
If car model is required, its a Sti V Type R Ltd.
simb
28 December 2003, 07:04 PM
#2
It depends which bush is worn. Usually it is the drop link bushes that are the problem, this is then one that connect the anti roll bar the the wishbone. This can be solved easily by buying a set from Jap-Innovations, Scoobymania, Powerstation, JW Racing, Power Engineering etc etc. Cost of around £60 a pair. If it is the bushes that hold the anti roll bar on to the chassis then you need to find a distributer for Powerflex who makes the uprated bushes - cost about £30.
Try a seach for drop links and see what comes up.
Try a seach for drop links and see what comes up.
Thread
Thread Starter
Forum
Replies
Last Post
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM