If anybody has fitted their own powerflex bushes to the front suspension, how easy is it to get the old bushes out and do you have to remove the wishbone completely or can u leave the ball joint still attached to car??

Thanks

Dale

 

I've done mine. Its easiest to remove the wishbone completely from the car. I found it easiest to drill out the existing rubber bushes then cut through the sleeves with a hacksaw. Suppose you could press them out if you have access to one.

 

Is it easy to get the wishbone back on again on your own or did u need some help??

How much difference after fitting the bushes?

 

Its easy to get the wishbone back in. Made a bit of difference to my car cos the original bushes were knackered.