tayscooby

iTrader: (3)

AP 4 pot rear brake kit. 325mm discs with bells. Not much use although could do with a clean up as sitting about a while. Pads are almost new ds2500 ferodo. These are classic fitment. £400 ono .

frayz

iTrader: (7)

PM sent mate

Kind regards

Frayz

P1-Murph

iTrader: (1)

Hey bud,

What rear brake shoe application are these for, or has the handbrake been amended to be hydraulic?

WUZ

iTrader: (14)

This is coming off a P1 AFAIR so it will fit an R160 diff and handbrake setup.

frayz

iTrader: (7)

And bugeye STI?

WUZ

iTrader: (14)

Well that is an R180 diff and the bigger handbrake shoe so I doubt it will fit

Billet

iTrader: (60)

Are these Subaru specific disks and calipers? Never seen AP lettering like that so was curious. I also though the AP rear disks were one piece items with the AP kit, is this a godspeed kit or similar?

Thanks.

frayz

iTrader: (7)

If they can be cost effectively converted to R180 I'm still interested.

Godspeed Brakes

iTrader: (259)

Yes its one of my kits , and cannot run on a 180 hub , only the 160's

Cheers Ian

frayz

iTrader: (7)

Would it be possible to swap the bells and brackets to fit an R180 setup Ian?
Is this something you can do? How much would it cost?

PM if you prefer

Godspeed Brakes

iTrader: (259)

It can't be done , with the smaller R160 backplates we only just had enough room to fit a bracket in place to bolt the calipers on , with the larger backplate on the R180 there would be no room to fit a bracket on , we tried it hoping to offer kits for the STi but couldn't do it

Cheers Ian

frayz

iTrader: (7)

So the ONLY option for the rear of the newage STi is the genuine STi kit available from AP Racing?
You don't do a kit yourself?
Sorry Tayscooby, I was very interested in these. Best of luck with your sale.

Kind regards

Frayz.

Godspeed Brakes

iTrader: (259)

Yes the only option is the AP kit , that kit has lug mounted calipers so they don't have a bracket , the calipers bolt directly to the backplate so this overcomes the issue of space , or lack of it for a bracket.

Unfortunately I can't make a kit using a radially mounted caliper as there is phisically no room to do it

tayscooby

iTrader: (3)

Bump....... New price £400

joe v3sti

iTrader: (8)

What rear hubs are on my 1995 sti type ra?
Anyone?

subaru.gtt.1995

iTrader: (2)

i have a my 95 gt turbo, if they fit mine, and if you would ship to belgium at a reasonable price, i could be interested....
can anyone tell me if my brake system would be up for the job?
i have fronts ap 6pot 330 kit, dot 5.1 and braided brake lines, if i mount the rear kit, should anything else be upgraded?
regards

leks1986

Postage to Poland?
Pay-Pal

KJD Mk1

iTrader: (3)

Looks like a quattro sport in the background

What age is the AP set up ?

BlueBugEye

iTrader: (12)

Will this fit a newage bugeye with r160 hubs/diff? Also will it be overkill with ap 330 4 pots on the front and mess up the brake balance?

Godspeed Brakes

iTrader: (259)

No it won't fit as the holes in the backplate on your car are in the same place as the STi , this kit will only fit the classic back plates , I'm sure you can fit the backplates to your car as the rest of the axle would be the same. You should be able to pick these up easy enough.

The STi Brembos will fit straight onto your car if you fit larger handbrake shoes or insert discs

Godspeed Brakes

iTrader: (259)

Yes it will fit straight onto your car , you won't need to change anything else

joe v3sti

iTrader: (8)

You have pm

subaru.gtt.1995

iTrader: (2)

another pm

subaru.gtt.1995

iTrader: (2)

by the way, does this kit allow my 17 inch oz prodrives? they do clear my cp5570 6pot calipers on front so is it safe to say rear will be no prob?prefer not to switch to 18inch...
thank you.

joe v3sti

iTrader: (8)

Guessing this sold

Joe

subaru.gtt.1995

iTrader: (2)

sold?

joe v3sti

iTrader: (8)

You have pm mate