New 2.35 Lateral Fully Built Engine
SOLD ! DEPOSIT NOW TAKEN.
Hi,
Due to a change of plans I am not finishing my project.
I was planning a daily driver 650bhp GT35 FMIC conversion for my wagon.
I am already committed to taking the engine so need to sell it, I will be looking for about 75% of it's cost so grab a real bargain.
I have not yet taken delivery but it is due to be finished very soon. It is being built by a reputable F1 race engine engineer whom Lateral Performance use to carry out all of their engine builds.
It is being supplied to me as a fully built up and timed unit with valve clearances set and will only require inlet/exhaust manifolds and ancillaries. It will come with all of the covers in place 'ready to fit'.
Spec is as follows, all items are brand new unless stated otherwise.
Used EJ22 Closed Deck Block Halves; cleaned, checked, bored & honed for 2.35 stroker conversion.
ACL Race Bearings.
Arrow Precision WRC Style Billet Lightweight Crank, 79 mm low pressure oil feed type.
Lateral Premium Forged Rods (800bhp spec)
Lateral Premium Forged Pistons for 2.35 conversion
Single AVCS Cylinder Heads, Ported & Polished.
Billet Inconel Exhaust Valves
Billet Stainless Intake Valves
Uprated Double Valve Springs
Titanium Valve Retainers
Lateral LP06 Hot Road/Race Cams
ARP 14 mm Head Stud Conversion
Alloy Adjustable Exhaust Pulleys
High Flow Oil Pump
Genuine Oil Modine
Kevlar Timing Belt
Genuine Idler Pulleys
Cosworth Baffled Sump Kit
Bits and pieces of my old engine (bolts, timing covers,sump,rockers etc) have been used to create this built engine. As you can see from above anything that warranted uprating has been uprated. Anything that hinted at not being 100 percent has been replaced.
This is an epic engine capable of running 600 bhp all day long.
It has cost well over £10,000.
I am looking for around £8000 but am open to offers, 07854 077 587.
Mark from Lateral can confirm the spec and build of the engine and I will provide detailed invoices of such to the purchaser.
Hi,
Due to a change of plans I am not finishing my project.
I was planning a daily driver 650bhp GT35 FMIC conversion for my wagon.
I am already committed to taking the engine so need to sell it, I will be looking for about 75% of it's cost so grab a real bargain.
I have not yet taken delivery but it is due to be finished very soon. It is being built by a reputable F1 race engine engineer whom Lateral Performance use to carry out all of their engine builds.
It is being supplied to me as a fully built up and timed unit with valve clearances set and will only require inlet/exhaust manifolds and ancillaries. It will come with all of the covers in place 'ready to fit'.
Spec is as follows, all items are brand new unless stated otherwise.
Used EJ22 Closed Deck Block Halves; cleaned, checked, bored & honed for 2.35 stroker conversion.
ACL Race Bearings.
Arrow Precision WRC Style Billet Lightweight Crank, 79 mm low pressure oil feed type.
Lateral Premium Forged Rods (800bhp spec)
Lateral Premium Forged Pistons for 2.35 conversion
Single AVCS Cylinder Heads, Ported & Polished.
Billet Inconel Exhaust Valves
Billet Stainless Intake Valves
Uprated Double Valve Springs
Titanium Valve Retainers
Lateral LP06 Hot Road/Race Cams
ARP 14 mm Head Stud Conversion
Alloy Adjustable Exhaust Pulleys
High Flow Oil Pump
Genuine Oil Modine
Kevlar Timing Belt
Genuine Idler Pulleys
Cosworth Baffled Sump Kit
Bits and pieces of my old engine (bolts, timing covers,sump,rockers etc) have been used to create this built engine. As you can see from above anything that warranted uprating has been uprated. Anything that hinted at not being 100 percent has been replaced.
This is an epic engine capable of running 600 bhp all day long.
It has cost well over £10,000.
I am looking for around £8000 but am open to offers, 07854 077 587.
Mark from Lateral can confirm the spec and build of the engine and I will provide detailed invoices of such to the purchaser.
Last edited by CrazyWagon; Aug 26, 2011 at 12:18 PM. Reason: Sold !
Joined: Apr 2002
Posts: 38,078
Likes: 310
From: The hell where youth and laughter go
Can you please state an asking price, as per our forum rules.
https://www.scoobynet.com/subaru-par...nd-advice.html
Thanks.
https://www.scoobynet.com/subaru-par...nd-advice.html
Thanks.
It is now finished !
Mark has contacted me today with the final bill and to tell me it is ready for collection.
Total £12036.54
Somebody come grab a bargain while I've still got my pants down !
Mark has contacted me today with the final bill and to tell me it is ready for collection.
Total £12036.54
Somebody come grab a bargain while I've still got my pants down !
Last edited by CrazyWagon; Aug 8, 2011 at 03:28 PM.
Hi,
I still have the engine for sale although there is a potential offer on the table.
They are UK type EJ207 heads with the single avcs. Ultra low mileage donor heads that were in as new condition before all the work carried out.
Call me if you are interested.
I still have the engine for sale although there is a potential offer on the table.
They are UK type EJ207 heads with the single avcs. Ultra low mileage donor heads that were in as new condition before all the work carried out.
Call me if you are interested.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post





great 1st post


