MY96 RA engine, running gear, leather interior, possibly full car
MY96 RA engine, running gear, leather interior, possibly full car
Closed deck block EJ20 engine. The timing belt snapped due to suspected cam siezing. There are marks on the upper left hand cam bearing where it has picked up. The engine is still in the car and will be sold with all ancillaries as I've no need for them because if I do keep the shell it will be getting a different engine and drivetrain for a RWD conversion. With that in mind it will include starter, alternator, turbo, coilpacks etc etc. £450 ono
TY752VB3FA Gearbox which worked fine up until the timing belt went. Complete with rear diff for £250 or £200 alone ono
HKS Hi Power cat back with flexi pipe fitted to a downpipe, so a full system. Still on the car so probably has a few scrapes £200 ono
Cusco front coilovers and unknown as yet rear suspension £120 ono
Black leather front and rear seats, with doorcards if required but they have grey fabric inserts and one has a small cut in it. Note the car has wind up windows and no central locking, but I'm not sure if that affects the doorcard shape £250 ono
Adjustable boot spoiler if I can unbond it from the boot £120 ono
Forge aluminium header tank with A'pexi cap £85 ono
There is a load more on the car which I will post up in due course, unless someone wants to make a reasonable offer on the whole car while it's still complete. It is MoT'd until Christmas and taxed til the end of September. There are a couple of patches of flakey paint and the driver's door is dented and the handle is cracked from an attempted theft.
I'll check on the wheels spec later, but they are all in good condition and have good 215/40/17 Pirelli P Zero Nero tyres all round. Brake discs are drilled and grooved on the front with 4 pot callipers and have good pads all round. I'll sort out more information and prices and pics if required soon.
Car is located in Burton Upon Trent and prices are plus delivery if required. Cheers
TY752VB3FA Gearbox which worked fine up until the timing belt went. Complete with rear diff for £250 or £200 alone ono
HKS Hi Power cat back with flexi pipe fitted to a downpipe, so a full system. Still on the car so probably has a few scrapes £200 ono
Cusco front coilovers and unknown as yet rear suspension £120 ono
Black leather front and rear seats, with doorcards if required but they have grey fabric inserts and one has a small cut in it. Note the car has wind up windows and no central locking, but I'm not sure if that affects the doorcard shape £250 ono
Adjustable boot spoiler if I can unbond it from the boot £120 ono
Forge aluminium header tank with A'pexi cap £85 ono
There is a load more on the car which I will post up in due course, unless someone wants to make a reasonable offer on the whole car while it's still complete. It is MoT'd until Christmas and taxed til the end of September. There are a couple of patches of flakey paint and the driver's door is dented and the handle is cracked from an attempted theft.
I'll check on the wheels spec later, but they are all in good condition and have good 215/40/17 Pirelli P Zero Nero tyres all round. Brake discs are drilled and grooved on the front with 4 pot callipers and have good pads all round. I'll sort out more information and prices and pics if required soon.
Car is located in Burton Upon Trent and prices are plus delivery if required. Cheers
More seat pics as requested via PM, forgot to mention the rear seats are the 60/40 split ones.
Driver's could do with a bit of polish...
Also, the engine has 5th injector if that makes a difference to anything. Pretty sure the turbo is a TD05 but it's hard to read past the air intake.
Non badged grille...
Roof is non vented...
Driver's could do with a bit of polish...
Also, the engine has 5th injector if that makes a difference to anything. Pretty sure the turbo is a TD05 but it's hard to read past the air intake.
Non badged grille...
Roof is non vented...
Last edited by Mitch C; May 9, 2011 at 05:05 PM.
Trending Topics
You too, so header tank provisionally sold
It's attached to the front bumper so needs to remain part of it all really.
£350 or very reasonable offer, as they have good Pirelli PZero Nero tyres fitted. Delivery would be extra but I'd prefer collection as I have lots of stuff going on at the mo.
It's attached to the front bumper so needs to remain part of it all really.
£350 or very reasonable offer, as they have good Pirelli PZero Nero tyres fitted. Delivery would be extra but I'd prefer collection as I have lots of stuff going on at the mo.
As no one appears to be interested, only the engine and box, interior and rims are now for sale. I'm going to convert the car to RWD and won't be selling the tiny bits people are asking for as I want the car to be usable on the road.
Cheers
Cheers
Cheers Mick, pleasure doing business with you 
I'll fire you a PM now.
I'll fire you a PM now.
Engine and box are now out. sp00ks has first shout on the complete engine but I'll update with more pics if it falls through.
I've found that it also has a quickshift and Mine's ECU. I opened it up to look inside but am not sure which bit is the uprated part. I can post pics later if anyone's interested in making me a reasonable offer.
I've found that it also has a quickshift and Mine's ECU. I opened it up to look inside but am not sure which bit is the uprated part. I can post pics later if anyone's interested in making me a reasonable offer.
Still have all body panels except boot spoiler for sale. Front bumper with blended in splitter, all lights, doors with wind up windows, silver/black cloth seats, four pot calipers, full exhaust etc all available.
Pretty good condition Matt, I'll have a look today and also see if I can find the code on the chassis plate.
Tyler-I think it had a T05 but can't remember. maybe sp00ks can shed some light? It's been adapted or welded by the wastegate outlet though. I'll get some better pics later.
Sorry for the slow replies, I didn't get any notification for some reason, but I do when I get PM's.
Tyler-I think it had a T05 but can't remember. maybe sp00ks can shed some light? It's been adapted or welded by the wastegate outlet though. I'll get some better pics later.
Sorry for the slow replies, I didn't get any notification for some reason, but I do when I get PM's.