Decided to break my WRX, so all parts are listed below... further info and more parts will be added but these are the ones that spring to mind. The car itself has done approx 100'000 miles and is a 1997 model in 230 white.

I'm based in Newcastle upon Tyne, postage is an option on any item at an extra cost. Payments via PayPal, cheque, bank transfer or cash. I'm open to serious offers as all the prices are pretty generic.

Obviously, there are alot of standard parts I have not listed, so if you're after anything just ask...


Engine & Running Gear

2.0ltr 'short block' forged engine - £995.00 (see bottom of thread for details)
Gearbox - £350
Apex'i Power FC & Commander (version 3/4) remapped by Bob Rawle - £500
Hybrid FMIC including all pipework - £200
Fujitsubo decat turbo-back exhaust, true 3" all the way through - £250
Harvey Smith ported headers and uppipe, DEI heatwrapped - £250
550cc Injectors - £200
SX Fuel Pressure Regulator with gauge - £100
Walbro Uprated Fuel Pump - £50
K&N Induction Kit with ZeroSports hardpipe - £100
Standard downpipe with CAT - £50
440cc Injectors - £75

Exterior

Rolling shell which will include bonnet, wings, bumpers, doors, standard suspension with SPAX springs and standard rear brakes - £500
... or split
Facelift front bumper, cut for FMIC, recently resprayed - £150
Aluminium STI lightweight bonnet - £200
Front wings, both driver and passenger and all 4 doors - £45 each
Facelift rear bumper - £50
17" Redline Innovit alloy wheels with Nankang Tyres - £350
'04 STI Brembo front brake calipers, near new Godspeed discs and pads - £500
P1 driving lights, surrounds and brackets - £150
Facelift full crystal pack (Headlights, Side lights, fog lights & indicators) - £200
Rear JDM STI lights with integral fog light - £200
Wind Deflectors, for 4 door saloon with no aerial on pillar - £80
Scoobyworld mudflaps x 2 choice of red with STI decals or black with no decals - £50 each
Version 6 STI rear spoiler - £150
Cusco 'H' Brace - £75

Interior

ProSport Stepper gauges in amber/white (boost, water temp and oil pressure) - £100
Nardi steering wheel and gear **** - £40
Standard WRX interior (front & rear seats, all 4 door cards and carpets) £100


2.0 EJ20 with cleaned and reset WRX heads, measured for compression and appropriate head gasket to give 8.29:1 CR
Wiseco Plus 50 Forged Piston Set (92.5mm)
Manley Steel Rods
ACL Race Bearings
Standard Subaru Crank (NOT nitrided or cross drilled)
Uprated Oil Pump with Plunger Mod
New Modine
Ran on MOTUL Fully Synthetic
Originally built by Harvey Smith in December 2009 and since the build has done approx. 5000 miles which includes 1000 miles running in on a "running in map" which was then remapped again to suit the forged engine with the other modifications (mapping done by Bob Rawle).

The engine currently runs around 340 - 350bhp with supporting modifications... which is way short of what this engine is capable of taking (around 500bhp).

Service History:
June 2009 - FULL service at Subaru; including changing all belts, plugs and engine/gearbox & diff oils at cost of £700.00
October 2009 - Plug change; Standard Subaru plugs for NGK Plugs
March 2010 - Oil and filter change; semi synthetic to fully synthetic after first 1000 miles running in period
October 2010 - Oil and filter change; MOTUL fully synthetic to Millers CFS fully synthetic

* There is alot more service history that can be supplied with the engine if required, including the original Japanese Subaru service book.

Engine to be sold as a "short engine" so just the block

If anymore info is required please dont hesitate to ask and any inspection is of course welcome.

 

pm sent for sx

 

180 delivered for the 550's????

 

do all gauges come with senders and fittings etc do you have a pillar pod ? and price posted plz matey

 

Are the wing mirrors electric and fold in? if so how much posted? cheers.

 

i take the wind deflectors off you how much for delievey and how do i pay you plz

 

also interesed in rear spoiler how much delevered plz

 

Everyone replied...

 

Hi, interested in the K and N and zerosports pipe, which K and N filter is it, the 57i? How old is it?

Thanks

 

do all gauges come with senders and fittings etc ? and price posted plz mate

 

Sabas... yes its the 57i, and is about a year old now

Steve71... yes comes with all senders and fittings, everything you'll need, £110 posted

 

pm sent!

 

Can you post pics up of the headers and uppipe mate.

 

Really interested in ur apexi, have u still got it?

 

Scooby Scot... yes the apex'i is still for sale

LJF... i'll get some pics as best i can 2moro but at the moment they're still on the car

 

interested in these bits mate let me know if they will fit a newage 04 plate wrx please thanks

Harvey Smith ported headers and uppipe, DEI heatwrapped - £250
Version 6 STI rear spoiler - £150
ProSport Stepper gauges in amber/white (boost, water temp and oil pressure) - £100 (with sensors/senders?)

 

ScotthodgeR6@googlemail.com to organise postage n payment

 

Could you put up pictures of the k and n and zerosports pipe, I would like to see how it fits in, as the biggest filter I could fit was a small apexi one.

Thanks

 

BAD WEATHER HAS MEANT I'M NOT GOING TO START REMOVING PARTS UNTIL AFTER THE NEW YEAR... ALLS PARTS PEOPLE HAVE ASKED FOR WILL HAVE FIRST DIBS

 

Mark: Did you get my phone call and email?

 

You have PM

 

did u get my pm ?

 

how u gettn on mate?

 

Hi mate,

Do you still have the Brembos/disks/pads? I'm assuming that the pcd of the disks is 5x100 so should fit my 2006WRX.

When do you think you will start breaking?

Cheeers,

Ade.

 

hey chap,

what heads have you got available?

cheers

 

hi budy are the brakes still for sale?

 

How much you looking to get for the Engine

 

Can you update whats not available anymore please ?

thanks

 

Are they genuine P1 lights and covers? if so I will take them,.

 

Brembos SOLD.

Car is breaking this weekend so everything available