Various classic parts
#1
Scooby Regular
Thread Starter
Join Date: Oct 2017
Location: Dumfries, Scotland
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
Various classic parts
Selling off all my parts from my project. All prices are collection from Dumfries, SW Scotland. I will ship smaller items but bigger ones will be pick up only.
Hardrace adjustable rear lateral arm kit (10 pcs) comes with trailing arms, adjustable lateral arms, adjustable drop links and mounting brackets for the drop links. Brand new, never been fitted. They are the hardened rubber ones, not the pillowball. £400
Rear diff support bushes (6599) Rear diff subframe bushes (6955) £100 for the pair
5 speed gearbox, rear diff, prop shaft and drive shafts. Gearbox code is 9R- TY752VBCAA, rear diff is whatever diff is matched to the gearbox from factory. £400
Front brembos, pads and vented discs. Each caliper has a stripped thread. They could also do with a refurb as the paint on them isn’t great. Discs seem relatively new, just surface rust due to sitting. Pads are unknown brand, decent amount of material on them. £250
V3/4 Simtek (Alcatek) ECU supplied by Andy Forrest. Can be mapped by RA Motorsport since they bought Andys classic mapping stuff. £250
Standard exhaust manifold with up pipe , Stainless decat downpipe with sensor, stainless mid section, Japspeed backbox. Heat wrap towards the top of the downpipe, plug and wires for sensor are all good, no leaks or blows, light scraped on the bottom of the backbox, nothing major £200
Greddy turbo timer. Comes with loom for classic impreza. £20
Hardrace adjustable rear lateral arm kit (10 pcs) comes with trailing arms, adjustable lateral arms, adjustable drop links and mounting brackets for the drop links. Brand new, never been fitted. They are the hardened rubber ones, not the pillowball. £400
Rear diff support bushes (6599) Rear diff subframe bushes (6955) £100 for the pair
5 speed gearbox, rear diff, prop shaft and drive shafts. Gearbox code is 9R- TY752VBCAA, rear diff is whatever diff is matched to the gearbox from factory. £400
Front brembos, pads and vented discs. Each caliper has a stripped thread. They could also do with a refurb as the paint on them isn’t great. Discs seem relatively new, just surface rust due to sitting. Pads are unknown brand, decent amount of material on them. £250
V3/4 Simtek (Alcatek) ECU supplied by Andy Forrest. Can be mapped by RA Motorsport since they bought Andys classic mapping stuff. £250
Standard exhaust manifold with up pipe , Stainless decat downpipe with sensor, stainless mid section, Japspeed backbox. Heat wrap towards the top of the downpipe, plug and wires for sensor are all good, no leaks or blows, light scraped on the bottom of the backbox, nothing major £200
Greddy turbo timer. Comes with loom for classic impreza. £20
Last edited by Badgie; 04 November 2018 at 02:03 AM. Reason: Updating
#3
Scooby Regular
Thread Starter
Join Date: Oct 2017
Location: Dumfries, Scotland
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
neilgreen1978
Subaru Parts
45
17 January 2014 04:31 PM