Hi,

I've added a new product to my line up of 3D printed scoobs mods.... Gear ***** with logos

Colours
Various available, but I usually have stock of black, blue (light or dark, and baby), red, silver, yellow (new), and white filament

Variants
Flat top - see image
Round top - see image (for the 'production' parts the print seam will be at the front!)

Logos
Currently I have designs for STi and WRX, but probably can do others if there is a enough request

Fitment
- M12 x 1.25 thread (newage, hatch and presumably WRX STi models, maybe classics too?)
- reverse lockout compatible
- the threads are slightly undersize to ensure a really tight fit that will resist rotation during use, I will provide a little piece of grippie rubber mat so you can tighten it on. It requires 2 or 3 times of winding on and off to clean the threads and ensure a snug fit that will bottom out the threads

Design
- 2 piece design. PLA material for the outer visual part as it prints better and provides a smoother finish, and with a PETG plastic insert (more durable than PLA) for the threaded piece
- printed in solid plastic, they weigh around 75g for the flat top and 80g for the round top (roughly half of the 6 speed newage stock part), so they have a nice solid feel to them
- the logos are inset and completely flush on the round top, and 'as near as' flush on the flat top ones

Cost
Flat = £10 + £3.50 UK RM 1st Postage (gifted on paypal)
Round = £11.50 + £3.50 UK RM 1st Postage (gifted on paypal)
PM for details

Disclaimer
This is intended as a decorative piece and whilst it is functional you must ensure that it is secure and suitable before use. I can not and will not accept any responsibility for injury or incident that occurs as a result of its use.

Thanks for looking!

 

Hi mate

any chance I could have one like the second picture but with this design?

 

Hi again!

I could get the numbers and R with the lines, but the STi symbol will be too small to print, any good still?

 

I can get inset numbers and STi logo, like on the left, but the smallest I can get for coloured inserts won't fit the STi logo, right...

 

Bump

 

could you do a blue flat top with red sti logo on ?

 

yep, drop me a pm!

 

My personal favourite so far. Silver on black...

 

Hi, could you do a black with this Blitzen logo in red?
Cheers

 

Hi,

Unfortunately that logo will be too long to fit as it would end up being too small to print.

 

Would you do gearknobs for other makes?

 

Yeah can't see why not, would need to know the thread size. What you thinking?

 

I will send you a pm

 

could you do the heater control ***** ???

 

possibly, do you have a part already removed to look at?

 

I will let you know

 

Bump. Great stocking filler!

 

bump, great stocking filler

 

Friday bump

 

Could you do a black flat top with pink STI logo

 

yeah can do. The red pink like the other pictures ok?

 

I'll pm you.