When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have for sale the oil cooler set up from my RA. It was mounted in the drivers side inner wing and ducted from the bumper into the custom made cooler duct.
The kit will come with the Mocal 25 row 115mm core which I bought new from Think Automotive last November. It also has a mocal thermostatic sandwich plate and AN10 fittings, hoses from the thermostatic plate to the cooler with heavy duty heat sleeve, and the fitting between the sandwich plate and oil filter. It also has a custom duct which was made by Frays on here to suit this oil cooler core.
This will need a new seal for the sandwich plate and the fitting from the block to the sandwich plate, the seal is approx £2 and cant see the fitting being much more than £5.
Will have a look but dont think so. The pipework basically runs straight out from the thermostatic take off mount at the oil filter to the wheel well side of the chassis leg/bodywork. It was bolted on there using the mounting holes in the cooler core.
Mocal oil coller set up
